Product Description
1Ka Steel -
Hair Restructurizer Treatment
Kit
Hair Teatment based on glyoxylic acid, mix of ten
amino acids and essential oils.
1Ka Steel does not use formaldehyde or any of its
derivatives.
It has a unique and revolutionary technology that
treats and rejuvenates the hair while providing a natural
straightening.
Using 1Ka Steel colouring or bleaching are made
right after treatment with no risk of losing the straightening
process or interfere with the result.
1Ka Steel is compatible with any chemical
treatment made previously, such as colouring, bleaching, Keratin,
Guanidine, Ammonia, Lithium and Sodium.
Kit Content:
1 x Thermo Acrylic Active 1 Liter
1 x Pre Tratamento Shampoo 1 Liter
1 x Natural Mask **0g
Step By Step
Instructions
*- Wash with deep cleaning shampoo (clarifying
shampoo) 3 times, massaging well and wait 5 minutes in the last
shampoo. Rinse completely.
*- Dry **0%.
*- Apply 1Ka Steel.
*- Use 2 overlapping plastic caps to keep the
heat of the head.
*- Pause for hair
de-structuring.
a- Wash the hair 3 times with warm water using
Shampoo 1Ka Pre Treatment and, on last shampoo, pause 5 to *0
minutes with shampoo in hair. This way the hair cuticle will be
wide open.
b- Rinse well removing all
shampoo.
c- Dry **0% with a hair dryer. It is very
important to remove all water that penetrated into the hair because
1Ka Steel will penetrate in the hair and cannot do it if water
occupy place in hair.
d- In a recipient, dispense approximately ****0ml
of 1Ka Steel. If necessary, add some more later. The remaining
product cannot be returned to the bottle because its contaminated.
Apply 1Ka Steel using gloves and a paintbrush, without touching the
scalp. Spread 1Ka Steel, in small portions, starting at the nape
and from root to the middle and tip. For virgin hair apply
throughout the hair and cover with 2 plastic caps. For hair that
received any previous treatment, but has virgin roots, apply first
to the virgin roots, cover with 2 plastic caps, wait *0 minutes
then spread to the rest of the hair. It is a lot easier to
implement and this way the de-structuring process occurs
simultaneously all along the hair. The caps are to keep head
natural temperature (*7°F = *6°C) and accelerate the de-structuring
process.
e- Check if the hair is already unstructured
doing the knot test. The complete hair de-structuring is decisive
for the final result.
1Ka Steel can be left much longer after the
de-structuring but not to take out before.
f- After the hair is unstructured, dry it **0%
with a hair dryer and, with a thick comb or brush, carefully let
the hair in line from the root to the tip. Letting it in line
allows the flatiron-straightener to reach closer to the root
without touching the scalp.
Tips for Better Results
*- Perform the knot test. Do a knot with about *0
hairs (the nape area, near the root, is where it takes more
time).
If the knot untied by itself, leave 1Ka Steel a
little more. If the knot remains tied, the hair is already
unstructured.
IMPORTANT:ALL
HAIR MUST BE UNSTRUCTURED BEFORE GO TO NEXT STEP.
If you are not **0% sure that all the hair is
unstructured, then wait a little longer. Only if the hair is
unstructured go to next step.
*- Rinse removing **0% of 1Ka
Steel.
*- Drain excess water with hands and over the wet
hair apply the mask, distributing thoroughly and well massaging the
hair.
*- Pause ***0 minutes (do not let more than *5
minutes).
**- Rinse removing **0% of mask. Dry with a hair
dryer.
**- Use a fl at-iron-straightener, pass 8
to
*5 times, slowly, in small batches of hair,
giving traction during ironing, hair will remember how you are
letting it now. When sealed the hair will show a healthy
brightness.
Hair Type Approx. Temp.
Medium or fi ne hair (virgin) **0°C to **0°C
(**4°F to **8°F)
Bleached, dyeing or **0°C to
**0°C
Sensitized hair due (**6°F to
**0°F)
Chemical process
Thick, Frizzy, **0°C to **0°C
Resistant (virgin hair) (**0°F to
**6°F)
Important:
Always start at a high temperature and decrease if there is colour
change.
**- Process finished. Style as you
desire.
g- For virgin hair (or also for any hair to be
dyed later) apply the flat-iron-straightener with 1Ka Steel still
in hair. This will cause a lot of smoke, but will leave hair
smoother and better treated.
h- For coloured hair that will be not dyed after,
rinse *0% or more of 1Ka Steel and dry the hair before ironing.
This will prevent colour changes occur.
i- The ironing process is decisive for the
treatment result. Use a good quality flat iron- straightener and
apply it 8 to *5 times, slowly, in small portions, keeping a good
stretching with comb to apply the iron. The hair will remember the
form that is being given now.
Note: If the hair colour changes reduce the iron
temperature.
j- Let the hair cool down to room temperature,
rinse well with plenty of water removing the entire 1Ka Steel from
the hair.
k- Remove the humidity excess with hands or a
towel and, over the wet hair, apply 1Ka Natural Mask, leave it for
*0 minutes. Rinse and dry. This will let hair to return to its
normal pH. The process ends here.
l- Finalize by styling as you desire, even apply
colour or any other treatment.
Total Time of 2 hours or less.
Hair Type Approx. Pause (in
Minutes)
Medium or fi ne hair (virgin) *0 to
*0
Bleached, dyeing or sensitized hair *0 to *0 due
chemical process
Thick, Frizzy, resistant (virgin hair) *0 to
*0
Important:You
can pause longer after the unstructured process, but not
less
Delivery:
Product Original From
Brazil!!!
Product will be Shipped From
Brazil
Parcel estimate time within 8 to
*6 business days, depending on destination custom clearance
process.
If, for some reason you didn't get it on time,
please contact us, so we can find out the issue that might have
occurred.
For any further questions, please don't
hesitate to contact us. Our on-line support team will be more than happy
to assist you in any issue or question, and we are committed to
provide the best service.
As it is noted in our selling terms and
conditions, we are not responsible for any local charges (Import
tax, VAT, etc.) that might apply for the order per your country's
customs regulations.
Country: |
Brazil |
Model No: |
-
|
FOB Price: |
229 / Set (Negotiable)
Get Latest Price
|
Place of Origin: |
- |
Price for Minimum Order: |
229 per Set |
Minimum Order Quantity: |
1 Set |
Packaging Detail: |
Sealed Corrugated Strong Box |
Delivery Time: |
15-26 days |
Supplying Ability: |
2500 Liter per Week |
Payment Type: |
PayPal, Western Union, T/T |
Product Group : |
Cosmetics
|