Product Description

Product Description
Neton's NTR***6C series of transceiver module is high performance,cost effective module compliant with the Gigabit Ethernet and ***0 BASE-T standards as specified in IEEE **2.*****2 and IEEE **2.3ab,which supporting ***0M data-rate up to **0 meters reach over unshielded twisted-pair category 5 cable. The NTR**6C supports ***0M full duplex data-links with *-level Pulse Amplitude Modula-tion(PAM)signals.All four pairs in the cable are used with symbol rate at **0M on each pair. The NTR***6C provides standard serial ID information compliant with SFP MSA,which can be accessed with address of A0h via the *-wire serial CMOS EEPROM protocol. The physical IC can also be accessed via *-wire serial bus at address ACh.
The Transceiver is hot pluggable and operates at *3.3V.

Product Features
1.*0/**0/***0 BASE-T operation in host systems with SGMII interface
2.Up to 1.*5G bi-direction data links
3.Single*3.3V power supply
4.Hot-pluggable SFP footprint
5.Full metallic enclosure for low EMI.
6.Low power dissipation(1.*5W typical)
7.Compact RJ**5 connector assembly
8.**0m transmission over unshielded twisted pair (UTP) Category 5 Cable.
9.Access to physical layer IC via *-wire serial bus
*0.Compliant with MSA SFP Specification and IEEE**2.3 ***0BASE-T operation

Order Information
Type:NTR***6C
MAX Interface:SGMII without clock*2
Speed Mode:*0/**0/***0
Notes:
1.The Serial Gigabit Media Independent Interface(SGMII) is designed and port speed between a *0/**0/***0 PHY and a MAC with significantly less half and full duplex and at all port speeds (*0/**0/***0M)
2.SGMII interface uses two data signals and two clock signals to convey *0/**0/***0 PHY and Ethernet MAC.But,SGMII interface without clock SGMII interface have same electrical characteristics as the 1.*5G SerDes interface.

Application
1. LAN ***0 Base-T
2.1.*5G Ethernet over Cat 5 cable.
3.Switch/Router to Switch/Router Link,
4.High speed I/O for file severs.