Product Description

Alumina Metallization Ceramic Substrate
1.Good heat conductivity
2.Factory price
3.ISO certified manufacturer

Alumina Metallization Ceramic Substrate

thick film alumina ceramic substrate

metalized ceramic substrate

high quality al2o3 ceramic substrate

high conductivity alumina ceramic circuit board

We are professional manufacturer offering you a wide range of technical ceramic solutions.

Innovacera provides electronic ceramic substrate including Al2O3 (Alumina substrate) and AlN (Aluminum Nitride substrate). These ceramic substrate have good mechanical strength and abrasion resistance, high thermal conductivity , very stable in high temperature and corrosive chemical and excellent electrical insulation.

Substrates made from Alumina Ceramic

Alumina ceramic is kind of structural ceramics, with insulation resistance, voltage resistance, high strength, good thermal conductivity, dielectric loss, stable electrical performance characteristics. Used in electronic ceramic substrates, ceramic electrical insulation, vacuum devices, devices porcelain, spark plugs and other products. We can make the part by hot injection pressing, dry pressing, isostatic pressing and extrusion productive technology etc.

Overview of Main Physical Properties:

1.Good electrical insulation

2.High mechanical strength

3.Excellent wear resistance

4.Excellent corrosion resistance

5.Low dielectric constant

Overview of Main Applications:

1. High Power LED ceramic substrate

2. Microwave (Wireless Communication & Radar)

3. Semiconductor Process Equipment

4. Solar Cell

5. Hybrid Electric Vehicles

6. Flip chip/eutectic substrate

7. Sensor ceramic substrate

Different Kinds of Substrates:

As requested, we provide various kind of metallizations as below:

1.Thin Film Ceramic Substrate
This product is widely used in circuit substrates for optical storage, optical communication, RF application, LED and various other uses.

2.Thick Film Ceramic Substrate
This product is widely used in circuit substrates for optical storage, optical communication, RF application, LED and various other uses.

3.High Temperature Co-fired Substrates (HTCC)
This product achieves a variety of products with high reliability, high density, and multifunction. It is used in ceramic heater, optical/power element package, and sensor package.

Difference between thin & thick film patterns

Thin Film Patterns

Thick Film Patterns

Better pattern accuracyof +/*1%

Normal Pattern accuracyof +/**0%

Higher surface roughness of <0.3um

Poor surface roughness of 1~3um

Goodsurface adhesion in both Al2O3 and AlN

Good surface adhesion in Al2O3 but poor adhesion in AlN

Good alignment accuracy

Poor alignment accuracy

Higher materialstability (Cu layer)

Normal materialstability (Ag and glass mixture)

Conductivity Comparison of Various Materials

Materials

Conductivity(W/mK)

FR4

0.2

Al2O3

****7

Aluminium Nitride(AlN)

******0

Gold

**5

Silver

**5

Copper

**8

Material Specifications&Properties

We can supply the products according to customer's drawings, samples and performance requirements.

Material

Unit

Al2O****7

Al2O****3

Al2O****0

Items

Al2O3

%

*9.7

*9.3

*5

Density

g/cm3

3.*5

3.*8

3.2

Water Absorption

%

0

0.*1

0.2

Flexural Strength

Mpa

**0

**0

**0

*0°C Leakage rate

Torr/L.sec

<****1

<****1

<****1

High Temperature Curve

mm

***0°C

0.2mm is allowed

***0°C

0.2mm is allowed

***0°C

0.2mm is allowed

High Temperature Bonding

***0°C
Not

***0°C
Not

***0°C
Not

*0~***0°C Coefficient of Linear Thermal Expansion

mm.***6/°C.m

8.6

8.2

8.2

Thermal Conductivity

W/m.K

*5

*5

*0

Breakdown Voltage

KV/mm

*0

*0

*5

*0°C DC Volume Resistivity

Ohm/cm

***4

***4

***4

High Temperature Volume Resistivity

***0°C M?

?0.*8

?0.*8

?0.*8

***0°C M?

?0.*2

?0.*2

?0.*2

***0°C Thermal Shock

?

Did not crack

in 6 times cycle at ***0°C

Did not crack

in 6 times cycle

at ***0°C

Did not crack

in 3 times cycle

at ***0°C

Limit of Application

°C

***0

***0

***0

Max Manufacturing Length for Tube

mm

***0

***0

***0

Overall Production Process:

Factory Tour:

Quality Control/Assurance Standard:

We are ISO certified: ISO***1:***8 ISO****1:***4 OHSAS****1:***9

The constant goal of Innovacera is a superior level of quality and sevice at competitive prices. Particular attention is given to the production of individual customer parts for both large and small runs. We implement a very sophisticated Quality Control process which we have our own customers certify. All parts that pass through our facility are visually and dimensionally inspected as well as calibrated. Our engineering staff is available for counsel and recommendations that will satisfy your ceramic requirements.

Superior quality of products with reliance is our prime consideration.

Feel free to contact us if you need any other assistance about our products.

We care and provide what you want!