Product Description

Feature:

1. LCD Keypad GSM Alarm System X6
2. Words LCD display for easily operation.
3. Two way communication with alarm host and alarm sensors, alarm host will check whether alarm sensors is in working status every 8 hours.
4. When user arm the system, alarm host will check whether door/window are closed, if not closed, LCD display will remind user which door is open, and user can arm the system successfully until all doors/windowsare closed.
5. Alarm sensor low voltage SMS alert function.
6. Extra SMS phone number for system's status.
7. Alarm memo, entry delay, exit delay
8. Hybrid alarm, *0 wireless zones, 4 wired zones.
9. Advanced zone attribute, user-friendly zone names.
*0. Relay output can be controlled by SMS or APP. This relay output used to control lights or some small home appliances.
*1. Support user code andadmistration code
*2. **0 alarm log
*3. Reset factory design
*4. Built-in speaker and Microphone
*5. Remote two-way intercom
*6. Built-in siren
*7. SMS alert, when system: Arm/Disarmed, sensor's low battery, AC power failure, phone line disconnect.
*8. Alarm communication via ADEMCO Contact ID protocol.
*9. Backup rechargeable battery, last more than 8 hours
*0. Work with CCTV system, IP camera

Technical Parameters
Power Supply: AC **0~**0V *0/*0Hz, 
Working Voltage: DC*2V 1A
Static Current:＜*5mA(When not in Charging,not including wired sesnor)
Alarm Current: <**0mA
GSM Transmission Power: 2W
GSM Frequency: **0/**0/***0/***0MHz (Fit for all of the world)
Back-up Battery: NI-HI **0MA/H, DC3.7V,  Standby: ＞9 hours, Charging: *2 hours full
Receiving Distance: >**0m(open)
Transmission Distance: >**0m(open)
Working Condition: Temperature: **0ºC ~ *0ºC     Humidity: 5% ~ *5%