Product Description

~~

A cement and acrylic-based, super-elastic, double components water isolation material which can bridge cracks. Components must be mixed before application. Resistant to positive water pressure.



Properties



Technical Properties

 





Application Areas:

•Indoor and outdoor,

•Horizontal and vertical applications,

•Groundwork isolation, retaining walls and basement isolation subject to slight vibrance

•Water tanks, cisterns, swimming pools (under the coverage)

•Isolation of deck roofs

•Irrigation channels, manholes, concrete pipes

•Wet areas such as bathroom, kitchen, balcony

•Facilities such as thermal springs, Turkish baths,

•Isolation of concrete flower receptacle.

Advantages:

•Easy to apply on horizontal and vertical surfaces with a brush, roller, trowel or spraying machine.

•Not affected by temperature

•Provides seamless water isolation without joints

•Bridges cracks up to 0,5 mm when applied in 2 mm thickness, upto 1,2 mm when supported with a mesh.

•Provides highly performing water isolation

•Is elastic, does not shrink or crack

•Allows the concrete to breathe

•Non-poisonous, perfect for water tanks

•Forms a perfect isolation layer under ceramic and screed, due to its flexibility and high bonding property

•Protects concrete surfaces from carbonization and chloride

Preparation of the Surface:

•Yzeyin Hazırlanması:

•Attention must be given that the application surface is cured.

•The application surface must be clear of materials which prevent bonding, such as dust, oil, paint, silicone, curing agents, detergents and mold release oils.

•Weak parts of the concrete must be repaired, plasters that are not well adhered must be removed, the surface must be flat and sound, static cracks on the building must be repaired with a plaster containing AQUALATEX or REPAIRGROUT EXPAN High Strength Shrinkage Compensated Repair Mortar. Dynamic (moving) cracks must be repaired with PU **0 Polyurethane Sealant. Irons and wedges on the surface must be removed and the holes that have water outflow must be filled with appropriate products, such as AQUASTOP.

•The surface must be saturated with water and must be kept moist during the application.

Preparation of the Mortar:

•Put Component B (*0 kg) in a clean pot. Add Component A (*5 kg) into the liquid slowly and mix preferably with a drill with low speed until there are no lumps. Do not add water. Leave the mixture to mature for 3 - 5 minutes, mix again for *0 seconds before usage.

•The mixture in the pot must be used in *0 minutes. In case this duration is exceeded, the mortar should not be used.

Application Information:

•AQUACEMENT 2K **1 Double Component Super Elastic Isolation Material is applied on the surface at least in 2 layers that are perpendicular to each other. There must be a waiting period between two applications, minimum 5 - 6 hours maximum *4 hours, at **0°C. Second layer must be applied before the first layer is completely dry.In case the first layer is dry, the surface must be moisturized again before the application of the second layer. The surface must be protected from sunlight and prevented from drying quickly, for 3 days after the application of the second layer.

•After the application of the first layer, the corners must be beveled before the application of the second layer.

•It is recommended to use a mesh between the layers which will increase crack bridging capacity

•It gains mechanical strength in 3 days, becomes waterproof in 7 days. It gains its final strength in *4 days.

•It has to be protected against any impact until it is over-coated.

Consumption:

1,***1,*0 kg/m2 is applied on each layer, in 1 mm thickness. It is recommended that 2 layers are applied (2,5 3 kg/m2). On areas where stronger protection is required, the consumption may increase up to 3,*5 4,5 kg/m2.

Caution:

•Avoid application in temperatures below *5°C and above **5°C.

•Avoid application on frozen areas, on areas under risk of freezing in *4 hours or on areas open to direct sunlight or wind.

•Do not add water to the mixture.

•Always add powder component into the liquid component.

•During the application, wet film thickness should not exceed 2 mm per layer.

Packaging:

Component A: *5 kg craft bags

Component B: *0 kg plastic drums

Shelf Life:

Unopened packages can be stored in dry environments for *2 months, and stacked *0 packages on a pallet. Shake the liquid component before use and protect it against frost.

Health and Safety:

As with all chemical products, contact with food, skin, eyes and mouth should be avoided during usage and storing. If swallowed by accident, consult a doctor. In case of contact with skin, rinse with plenty of water. Keep out of reach of children.