Ams Industrial Group

azadi,tehran,Other,Iran

Free Member

Asphalt Mixing Plant

Iran

AMS-AP-AM

210000 ~ 550000 / Plant ( Negotiable ) Get Latest Price

Tehran-iran

210000 per Plant

1 Plant

Standard Wooden Packaging For Machinery

32

1 Plant per Month

T/T

Asphalt Mixing Plant

Product Specification

cyclone or Bag

Product Description

Asphalt Mixing Plant 160 TPH Specification
The capacity of the factory is 160 tons per hour.
Automatic, Semi-Automatic, and Manual Control.
image
  1. Cold Material Silo
    1. A 4 part machinery, Dimensions: 15m*2.4cm*2.74cm.
    2. Body Sheet made of 5mm.
    3. Cones Dimensions: up3*2.40 and bottom 0.50*0.50.
    4. Stands made of Beam 10 & 12.
    5. Chassis made of Studs and Beam 14.
    6. Stands are armed with crosses made of lath 6.
    7. 4 Feeder tapes with Electromotor Gearboxes of 2.2kw made in Europe.
    8. Armed with inverter for controlling the cargo being shipped from the control center.
    9. Feeder conveyor joining is done with screw.
    10. A conveyor belt of width 60cm, 14meters with Electromotor Gearbox of 4kw, made in Europe.
    11. Conveyor Rubber is made of resistant and first class material and resistant to abrasion.
  2. Conveyor transporting the cold material to dryer.
    1. Dimensions are: Length 12meters, width 80 cm.
    2. Chassis is made of studs 14.
    3. Electromotor gearbox 4kw, and made in Europe.
    4. Stands are made of 2inches thick Mannesmann pipe.
    5. Conveyor Rubber is made of resistant and first class material and resistant to abrasion.
  3. Hot Material Furnace (Dryer)
    1. Dryer dimensions: length 9meter, thickness of sheet 12mm, diameter 220cm.
    2. Double hot parts of conexion and radiation.
    3. Conexion part is made up of bended blades of 8mm thickness.
    4. Radiation part is made up of bended blades of 8mm thickness.
    5. Spiral blades for leading the material are made up of 10mm sheet.
    6. Material entrance box, and exhaust exit are made up of 8mm sheet.
    7. Material exit box is made up of 10mm sheet.
    8. Chassis is made up of industrial studs 24.
    9. Stands are made up of box sheet 12.
    10. Dryer rings dimensions: diameter of 2680mm, and thickness of 180mm. It is made up of cast iron, steel, and manganese, which is connected to the chassis using Z-shaped sheets.
    11. Dryer bottom rollicks with diameter 50cm, are made up of cast iron, steel, and Manganese.
    12. Two freewheeling made up of cast iron, steel, and manganese, to avoid the dryer from moving in length direction.
    13. Electromotor gearbox: 40kw, and made in Europe.
  4. Multi-Cyclone Duster
    1. The machine is located between dryer and suction.
    2. Chassis dimensions: 2.45*2.45 made up of 5mm thickness sheet.
    3. 48 unit duster missiles.
    4. 48 unit cyclone blades.
    5. Stands are made up of 5mm bended sheet.
    6. Entrance and exit canals are made up of 4mm thickness sheet.
    7. Armed with a blade tap for Electromotor gearbox with 1.5kw power, and made in Europe.
  5. Centrifugal suction
    1. Snail-shaped chassis made up of 6mm thickness sheet.
    2. The chassis is also armed with 10mm thickness strap in length and width.
    3. 16 blades propeller with the diameter of 1380mm.
    4. The blades are made of 6 mm thickness anti-abrasion sheet.
    5. Blades shape is based on FLUED MECHANIC standardization.
    6. Chassis is made from studs 16.
    7. Automatic air control canal, remotely controlled from the control center.
    8. 75kw European made Electromotor.
  6. Hot Material Elevator
    1. This piece of machinery stands between dryer and screen.
    2. The chassis is made up of 4mm & 6mm thickness bended sheet.
    3. The chassis is armed with bended studs in length and width.
    4. 80 shovels made up of 4mm sheet, bended with especial pattern.
    5. Almond-shaped chain made up of fittings No. 18.
    6. Electromotor gearbox 18.5kw, made in Europe.
  7. Filler Elevator
    1. This piece of machinery stands between spiral and silo.
    2. The chassis is made up of 3mm & 6mm thickness bended sheet.
    3. The chassis is armed with bended studs in length and width.
    4. Shovels made up of 3mm sheet, and bended.
    5. Almond-shaped chain made up of fittings No. 13.
    6. Electromotor gearbox 7.5kw, made in Europe.
  8. Vibrating Screen
    1. 4 Stories nets to separate the hot material completely.
    2. Covered in order to avoid dust and fumes to the surrounding environment.
    3. Pipe connection to filter valve to remove the dust from top part of the vibrating screen.
    4. Electromotor 11kw, and made in Europe.
    5. Armed with cast iron, three-piece bearing to enhance and ease lubrication of ball bearings during their uptime.
  9. Hot Material Silo
    1. Four silos which contains the hot separated material.
    2. Chassis dimensions: 2.50*5.10m.
    3. Chassis made of 6mm thickness sheet.
    4. 4 pneumatic jacks to open and close the exit valves.
    5. Iron cast bearings with brass bush, resistant to heat and abrasion.
    6. Overflow shoot made of 4mm sheet.
  10. Material Scale Silo
    1. Chassis made up of 4mm sheet.
    2. Chassis dimensions: 1.10*1.50*1.90m.
    3. Jack for opening and closing scale valve.
    4. Armed with cast iron bearing, brass bush, resistant to heat and abrasion.
    5. Four load cells.
    6. Digital weight screen located in control center.
    7. The control of this silo is conducted in control room.
  11. Filler Silo
    1. This piece of machinery stands between filler elevator and blade valve.
    2. Chassis is made of 4mm thickness sheet.
    3. Dimensions: 1.80*1*2.50.
    4. Overflow shoot made of 4mm thickness sheet.
  12. Blade Valve
    1. This piece of machinery stands between filler silo and filler scale to control the exit of materials from filler.
    2. Chassis is made up of 8inch Mannesmann pipe.
    3. Blades are made up of 8mm sheet.
    4. Electromotor gearbox 1kw, and made in Europe.
  13. Filler Scale
    1. Chassis made of 3mm thickness sheet.
    2. Shaped like a cone with dimensions: 0.60*0.22*0.95m.
    3. A pneumatic jack to open and close the exit valve.
    4. Three load cells.
    5. Digital weight screen located in control center.
    6. The control of this silo is conducted in control room.
  14. Upper Spiral
    1. This piece of machinery stands between the scale, filler, and mixer.
    2. Chassis is of 10inch pipe.
    3. Length 1.20m.
    4. Electromotor gearbox 1.5kw, and made in Europe.
  15. Mixer
    1. Chassis is made of 10mm thickness sheet.
    2. Dimensions: 1.05*1.85*1.80m.
    3. Two axles, distance from four sides 110mm.
    4. 28 arm blades made up of cast iron, steel, manganese.
    5. The internal part of chassis is covered with tiles in dimension of 0.30*0.30m made up of cast iron, and they are easily displaced.
    6. Two 63-gear, thickness 120mm.
    7. Mixer shower, double sided, with 8 bitumen spray nozzles.
    8. Armed with 4mm sheet cover.
    9. Electromotor gearbox 55kw, made in Europe.
    10. Two jacks for opening and closing the mixer valve.
  16. Bitumen Scale
    1. Cone shaped chassis, diameter 55cm, length 80cm.
    2. Chassis made of 3mm & 4mm sheet.
    3. Double sided pipe for entrance and exit of the bitumen, in order to keep the scale storage hot.
    4. One load cell.
    5. Digital weight screen located in control center.
    6. A bitumen pump of capacity 3inches with electromotor 11kw, made in Europe. The pump is used to inject bitumen to the mixer shower.
    7. A three-way valve, double sided, made especially to circulate oil, plus a jack.
  17. Burner Dryer Turbo Jet
    1. Dryer burner with heat capacity of 10mil.cal/hour.
    2. Armed with head and motor for arranging air valve and fuel from control center room.
    3. Electromotor 30kw, made in Europe.
    4. Armed with Landis photocell.
    5. Armed with fireproof cap.
  18. Hot Oil Heater for 500,000 Kilo Calories.
    1. Cone shaped chassis made up of 4mm sheet, diameter 120cm.
    2. Pipes Quell in two long and short diameters made up of 2inch Mannesmann.
    3. Chassis made of profiles 80*80.
    4. Insulated with stone wool and wire net with the thickness of 100mm.
    5. The sidewall of the burner insulated by fireproof cement.
    6. Insulator cover made of aluminum 0.7mm thickness.
    7. Oil pump for hot oil with electromotor 15kw, made in Europe.
    8. Armed with Thermostat valve.
    9. Armed with heat sensors.
  19. Bitumen Flask (50,000Litre)
    1. Cylinder shaped chassis made of 6mm thickness sheet with length of 10.50m and diameter of 2.40m.
    2. Both ends lentiforms parts of the bitumen flask made up of 8mm thick sheet.
    3. Stands are made up of 6mm and 8mm sheet.
    4. A 20 set coil of 2inch Mannesmann pipe, with the length of 10m.
    5. A float to distinguish different scales of bitumen used.
    6. Insulator made up of glass wool with the thickness of 50mm.
    7. Insulator cover made up of galvanized with the thickness of 1 mm.
    8. A 2.5inch pump with Electromotor7.5kw, made in Europe.
  20. Asphalt Storage Silo
    1. Silo volume: 25,000KG of Asphalt.
    2. Chassis dimensions: 2.30*2.50*4m.
    3. Chassis made of 6mm thick sheet.
    4. Chassis armed with 10cm length with 10mm thickness.
    5. Three jacks to open and close the valve.
  21. Piping
    1. Piping is double and is made of Mannesmann pipes of 2.5-4inches. Hot oil runs in the exterior pipe which eases the movement of bitumen in the interior pipe.
  22. Mixer Tower
    1. Tower stands are made up of bended 8mm thick sheets. Dimensions: 55*40cm.
    2. Floors of the mixer tower are made up of industrial beams and studs.
  23. Painting
    1. One stainless layer and two high-grade layers of main paint.
 

To

Subject

Message

I want to know

Contact Information

Mr. Mohammad

Ams Industrial Group

azadi, tehran, Other, Iran

1456614849

More Products From Other Suppliers