AWgage-150 Metal Film Metrology

FOB Price

Get Latest Price

1 Minimum Order

Country:

USA

Model No:

AWgage-150 Metal Film Metrology

FOB Price:

(Negotiable) Get Latest Price

Place of Origin:

Price for Minimum Order:

Minimum Order Quantity:

Packaging Detail:

Delivery Time:

Supplying Ability:

200 Piece per Year

Payment Type:

Product Group :

Metal Film Metrology

Contact Now

View Brochure

Allwin21 Corp.

USA

Free Member

Contact Person Mr. Peter

220 Cochrane Circle, Morgan Hill, California

Contact Now

Product Specification

Made in U.S.A.:Production Proven

Product Description

AWgage***0 measures sheet resistance in ohms per square or milliohms per square. If specific resistivity is known, the thickness of the deposited film layer can be computed from the sheet resistance. The choice of measurement data is easily get in the software. AWgage***0 can accommodate **0mm (6") wafers as well as the standard 2", 3",4", 5" wafers without any hardware change
AWgage***0 Metal Thin Film Metrology Key Features:
*0 years proven Eddy Sheet Resistance Measurement technology.
Non-contact Sheet Resistance Measurement.

W/square to *9,**0W/square sheet resistance measurement range.

       **0 to **0k Metal Film Thickness range.
       Touch Screen Monitor GUI and PC w/ Advanced Allwin*1 software.
       Wafer carriage travel programmed with internal encoder step motor , without encoder disk.
       Consistent wafer-to-wafer process cycle repeatability.
       Small footprint and energy efficient.
       Made in U.S.A.
AWgage***0 Metal Thin Film Metrology Software Key Features:
       The AWgage***0 system is controlled by menu commands from the control software. This software allows a great deal of flexibility and control of the Allwin*1 system. The AWgage***0 control software features the following:
       Automated calibration of all subsystems from within the control software. This allows faster and easier calibration, leading to enhanced process results. The AWgage***0 allows calibration of the ohm and milliohm measurements within the software for maximum performance and accuracy. This provides a much easier and faster method to calibrate the instrument than by adjusting pots on the back of the traditional Sheet Resistance Measurement Instrument.
       The SOFTWARE can compensate for where the flat is on the carriage to locate the test points.
       It features a recipe editor to create and edit recipes to fully automate the processing of wafers on the Allwin*1 system.
       Validation of the recipe so improper points will be revealed.
       Storage of multiple recipes, process data and calibration files so that process and calibration results can be maintained and compared over time.
       Passwords provide security for the system, recipe editing, diagnostics, calibration and setup functions.
       Simple and easy to use menu screens which allow an automatic cycle to be easily defined and executed.
       Troubleshooting features which allow engineers and service personnel to activate individual subassemblies and functions.
AWgage***0 Metal Thin Film Metrology Specifications:
       Perform odd number of site tests: 1 to 9 points
       Highly Conductive or Metal Sheet Resistance:1 to 1,**9 mW/square, or 1 to 1,**9W/square, or *0 to *9,**0W/square
       Highly Conductive or Metal Film Thickness: Minimum: **0 ngstrm; Maximum: Proportional to resistivity. Maximum for a resistivity of 2.7mW-cm is **0 k (*7mm)
       Sheet Resistance Repeatability:Total repeatability is the standard deviation (s) percent of mean value(X%),1 count.1 to **0 mW/sq; W/sq 1%;**0 to **0 mW/sq; W/sq 2%; **0 to ***0 mW/sq; W/sq 4%; ***0 to 1,**9 mW/sq; W/sq 6% 1,**9 to 5,**0 W/sq/ ***0 to *0,**0 W/sq / *0,**0 to *5,**0 W/sq Consult Factory
AWgage***0 Metal Thin Film Metrology Configuration:
       Main Frame
       Wafer Carriage (**6)
       Measurement Head
       RF Tank Circuit board
       Pentium® class computer board
       Main control board
       Motor control board.
       Two USB Ports
       Two Extra DB9 Ports
       *5inch touch screen GUI
       Allwin*1 Corp proprietary software package.
       Mouse & keyboard .
       USB Flash Drive with AW Software backup.
       CE Certification (Optional)
AWgage***0 Metal Thin Film Metrology Measurement Processes:
       Turn on the power to the AWgage***0. Allow *0 minutes for warming up.
       Select an existing recipe or create a new recipe.
       When The carriage is in the loading position, place the wafer on the carriage between the four locator blocks. The wafer will be centered over the circular platform that rotates the wafer.
       Manual Mode: Press the MAN/AUTO , so the LED is off. Momentarily press the START/STANDBY . The carriage will move the wafer under the measurement head to the first point in the measurement sequence. For multi-point measurements*-press START/STANDBY once for each point in the measurement sequence. The wafer will be advanced to the next point. When the measurement sequence is complete the carriage will move to the right until the wafer is out from under the measurement head in the loading/unloading position. The wafer can be removed from the carriage after it has reached this position.
       Automatic Mode: Press the MAN/AUTO on the AWgage***0 control panel until the LED comes on. Press the START/STANDBY . The entire measurement sequence will be performed without further operator intervention. When the sequence is complete, the wafer will be moved to the unloading position.
       PC Screen Mode: Press the Start Test at the Process Screens (for Engineer or Production) to test the wafer that is on the wafer carriage, using the selected recipe. The entire measurement sequence will be performed without further operator intervention. When the sequence is complete, the wafer will be moved to the unloading position.
       All data measurements are recorded in the computer for later retrieval, inspection and, if desired, a print-out of the measured points can be printed on an external printer.
       AWgage***0 Metal Thin Film MetrologyFacilities Requirements:
       Instrument needs to be on a hard/solid surface.
       The room temperature should be close to *3° C for the greatest measurement accuracy.
       Avoid environments with high concentrations of particulates, especially abrasives such as glass and silicon dust.
       Power : *0/*0Hz, Single Phase, **0/**0VAC, 2 Amps
       Weight and Dimensions: *4 LBs ; *1 inch (W) X *8 inch (D) X *2 inch (H)

Country:	USA
Model No:	AWgage-150 Metal Film Metrology
FOB Price:	(Negotiable) Get Latest Price
Place of Origin:	-
Price for Minimum Order:	-
Minimum Order Quantity:	1
Packaging Detail:	-
Delivery Time:	-
Supplying Ability:	200 Piece per Year
Payment Type:	-
Product Group :	Metal Film Metrology