Product Description

BH**3RT*2
Bluetooth  Headset  User Manual
Bluetooth headset should be used with the compatible devices which support bluetooth wireless technology. This allows you the freedom to make  any  calls  at  any time.
Please read this user manual carefully before using the headset, and also read your device’s user manual regarding the bluetooth function, and pay attention to those important safety and maintenance information.
Please keep the headset away from children.
Specifications
Bluetooth Specification
Bluetooth Profiles Supported
Transmission Power
Operation Range
Frequency Range
Battery
 
Charging Voltage
Charging Time
Talk Time*
Standby Time*
Dimensions(mm)
Weight
 
V2.0+EDR
Headset, Handsfree
Class 2
Up to *0 Meters
2.**2~2.***5 GHz
Built-in Rechargeable
3.7V Li-polymer Battery
DC4.***5.*5V
About 2 hours
Up to 4 hours
Up to **0 hours
L*3 X W*6 X H9.5
About 6.4g
 
* The time mentioned as above may vary due to user’s
operation mode and device settings.
Structure Sketch

(1)Indicator Light      
(2)Multifunction Button(MFB)
(3)Charging Socket
(4)Ear Hook
(5)Microphone
(6)Speaker
(7)Volume Key -  (V-)
(8)Volume Key + (V+)
 
Basic Operations
Charging Your Headset
Prior to using the headset for the first time, please fully charge the battery.
Approximately 2 hours are required to fully charge the headset.
The indicator light turns red while being charged, and will turn to blue automatically after being fully charged.
When the headset is running out of battery, it beeps and  the indicator light will flash red(the headset will switch off automatically when the battery is drained). Please charge the headset as above steps in time to prolong the battery's using life (Charging indication will be delayed for a few minutes if the headset has not been used for a long time or the battery is drained).
Note:
Use only the supplied charger to charge the headset, or could be dangerous and obey the validation for this product or the maintenance article.
Do not attempt to force open the built-in battery as this could damage the headset.
If left unused, a fully charged headset will loose its power automatically. It is recommended to charge the headset each three months.
Do not leave the headset in a too hot or too cold condition (best between *5℃and *5℃)which may affect the headset's operations although it is fully charged.
Do not dispose of the headset into a fire or water.
 
Turning on the Headset
In OFF MODE, press and hold MFB until the indicator light flashes blue, then the headset will enter into STANDBY MODE.
 
Turning off the Headset
In ON MODE, press and hold MFB until the indicator light flashes red, then the headset will enter into OFF MODE.
 
Pairing Your Headset with a Bluetooth Mobile Phone
1.Ensure the headset is off, and the distance between your headset and phone is within 1 meter.
2.Press and hold MFB until  the indicator light becomes blue steadily as PAIRING MODE.
3.Activate the bluetooth function on the phone, search bluetooth devices (See the user guide of your phone for instructions).
4.Select headset “BH**2T” from the found devices list of the phone.
5.Enter the passkey “***0”, and confirm to pair the headset with your phone. If successfully paired, the headset will enter into the STANDBY MODE, the indicator light flashes blue(If the pairing cannot be completed within *0 minutes after the PAIRING MODE has been activated, the headset will turn off automatically, please repeat the above steps to do the pairing again).
6.Ensure the distance between your headset and phone is within *0 meters, and without any obstacles, you can use the headset  freely.
7.If the headset had paired with your phone but disconnected, it will connect the paired phone automatically again when you turn on it within operation range.
 
Answering a Call
Press MFB once.
 
Ending  a Call
Press MFB once.
 
Voice Dialing
In STANDBY MODE, press and hold MFB for about **5 seconds. Say the voice tag as soon as you hear the short beep(ensure your phone
 
supports voice dialing function, and you have recorded the voice tag into your phone.See the user guide of your phone for instructions.)
 
Last Number Redialing
Press  MFB once
 
Adjusting  Volume
Press V+ or V- to adjust the volume to meet your need.
 
Power Saving
The headset will turn off automatically if it can not be paired or connected with any devices within *0 minutes.
 
Disconnecting
To disconnect the paired headset from your phone, please turn off the headset or disconnect the headset from the Bluetooth menu of your phone.
 
 
Care and Maintenance
Do not use abrasive cleaning solvents to clean the headset.
Do not allow the headset to touch with any sharp objects as this will cause scratching and damage.
Be sure to store the headset  in a dry place, free from extreme high temperature, humidity and dust.
 
Additional Statements
The Headset is compliant with the specified Bluetooth version.  It does not guarantee compatibility of all functions on every Bluetooth enabled device.  Please check your device's user manual for compatibility and functionality.
Charge the headset under any status to a reset.
The headset will beep when operates  successfully, but this may be  too low to hear.
The above operations may vary due to different devices.
Manufacturer reserves the right of final explanation of all the above statements.
Bluetooth  Headset  User Manual
Bluetooth headset should be used with the compatible devices which support bluetooth wireless technology. This allows you the freedom to make  any  calls  at  any time.
Please read this user manual carefully before using the headset, and also read your device’s user manual regarding the bluetooth function, and pay attention to those important safety and maintenance information.
Please keep the headset away from children.
Specifications
Bluetooth Specification
Bluetooth Profiles Supported
Transmission Power
Operation Range
Frequency Range
Battery
 
Charging Voltage
Charging Time
Talk Time*
Standby Time*
Dimensions(mm)
Weight
 
V2.0+EDR
Headset, Handsfree
Class 2
Up to *0 Meters
2.**2~2.***5 GHz
Built-in Rechargeable
3.7V Li-polymer Battery
DC4.***5.*5V
About 2 hours
Up to 4 hours
Up to **0 hours
L*3 X W*6 X H9.5
About 6.4g
 
* The time mentioned as above may vary due to user’s
operation mode and device settings.
Structure Sketch

(1)Indicator Light      
(2)Multifunction Button(MFB)
(3)Charging Socket
(4)Ear Hook
(5)Microphone
(6)Speaker
(7)Volume Key -  (V-)
(8)Volume Key + (V+)
 
Basic Operations
Charging Your Headset