Product Description

u Main technical parameters
1. Rang of work
Thickness: 0.*3 - 0.*5mm
Width:    *****0mm（ordinary sheet shape)
Length: **0 - ***0mm
2. Require for coil
Width tolerance: ±0.1mm
Burr: ≤0.03mm
S deviation between: ***0mm, ≤0.2mm
Material wave: Local wave height ≤1mm
Material shall have no rusty spot, Thickness deviation ≤0.*2mm
3. Precision
Length tolerance: ±0.2mm       Angle tolerance: ±0.**5°         Burr: ≤0.*2mm
4. Feeding speed: 1*0m/min*****0m/min
5. Cuter life: Not less than 1 million times (each grinding); carbide  material.
V cutter not less than **0 thousand times (each grinding); carbide  material
O cutter not less than **0 thousand times (each grinding); carbide  material
6. Total installed capacity: About *3Kw
7. Total gas consumption: 0.2 M³/min
8. Working condition:
(1) Temperature less than *0°C
(2) Voltage fluctuation: **0V ±*0%
(3) Frequency: *0Hz/*0Hz
9. Has seven step function
*0. Operation table direction: From left to right, face to the equipment.
*1. Shear sheet shape: Ordinary sheet shape: edge chip, equilateral column, unequal column, Yoke piece
   Vertical   step lap,:3step  /5step  / 7step
   Horizontal  step lap:  3step  /5step  /7step