Product Description

Product model:SD-J**8
Product capacity:***0mah
Product size:**0**8**0mm
Surface treatment process:ABS material panel,double UV spray paint,add the pearl process,the surface was hardness,It’s difficult to scratch the product’s surface.
Middle frame are used in electroplating processing, high-grade, fashion appearance.
Colour: white ,purple, blue ,pink, green
Mainboard:ABR**1
Battery :by using lithium ploymer battery:*****0,*****0,*****0
Battery size:length/wide/thick=*0**0*6.0mm.

Features:
1.Touching one will show the power bank’s battery.
2.Input voltage 4.**6V,the typical value is 5V.
3.Charge current:*******0mah(we can adjust according to clients needs and
Programming)
4.Constant current/constant voltage charge control,in the situation of no overheating danger can maxmine the charging rate thermal regulation function.
5.About powerbank that you didn’t use it for a longtime(now the battery voltage is low,less than 2.9V),you can trickle charge for it and activate battery.when voltage beyond 3V,automatically into constant current/constant voltage charging mode.
6.Automatic check user’s connected load,awaking power bank .automatic charge for devices,you don’t have to manual.
7.After devices charging ,it will close the power bank’s output automatic .go into a low power consumption.
8.Over-current:after over-current,it can automatically cut off the power bank output.at the same time,four electricity power light is bright can remind cliends.after disconnect the load,it can automatically recover output.
9.Short circuit protection:when output are short circuit,powerbank can disconnect at once to protect powerbank.at the same time,four lights are bright can remind user.after disconnected, it can automatically recover output.Do not need to use the charger to activate.
*0.The output conversion efficiency:*0%**9%