Product Description

size from ******0 all can make 

coat by ourselves

open teeth as your request. 

coat have TIN, TICN ,AItin and so on.



Circular saws coated by TiN (titanium-nitride) reach very high surface microhardness which enables

their using for separation of material of high mechanical tenacity. It is very suitable for cutting medium-

alloyed and hard steel. The coat characteristics enable to heighten circumferential speed and feed rate

nearly by *0 % and it very shortens the time of working cycles. This coating with a titanium base 3 microns

thick obtained at a process temperature of approximately **0°C. It guarantees an oxidation temperature of

**0°C. Its low thermal conductivity provides a reliable heat shield for the sublayer.

Materials: PVD coating suitable for cutting low alloy steel and must always be used with plenty of lubrication.

It is not suitable for cutting copper, brass or bronze.

Technical characteristics: Surface Hardness: ********0 HV ; oxidation temperature:**0°C;friction

Coefficient : 0.*5;