Product Description

  Durable,not expensive   iron ore  hammer crusher


     iron ore  hammer crusher  from our Golden machine  is a high efficient and energy saving machinery which  introduces successful experience of the same machines home and abroad. These series of  iron ore  hammer crusher  are widely used in mine, metallurgy, construction, road building, railway, water conservancy and   chemical industry.These hammer crusher feature high crushing ratio, good shape in product, simple structure, reliable performance and low operation cost. They are ideal choice for primary crushing.

 iron ore  hammer crusher  Working Principle

Motor of   iron ore  hammer crusher   drives rotor to rotate in high speed in the crushing cavity. The materials are feeded into the machine through the upper feeding opening and are striked, impacted, sheared and grinded   by high speed moving. Under the bottom of rotor, it is equipped with sieve plate. Among the crushed  materials fractions that is less than mesh size are discharged through sieve plate, materials fractions  that is bigger than mesh size are kept on the sieve plate to be striked and grinded by hammer and they are discharged out of machine finally. The main woriking parts of hammer crusher is the rotor with   hammer. Rotor consists of main shaft, disc, pin roll and hammer.

Durable,not expensive   iron ore  hammer crusher

 iron ore  hammer crusher  Applicability

This series production is suitable for that material whose pressure resistance  below **0MPA,such  as:limestone,plaster,coal,marlite,sand shale and so on,it has features of big crushing rate,final production size even,simple structure,stable,easy maintenance and low operate cost.it is widely used in concrete,building,metallurgy and airport building industry.
 

 iron ore  hammer crusher  Technical parameters

 iron ore  hammer crusher  installation, use and maintenance:

First, the  iron ore  hammer crusher  installation.
1, the hammer break should be installed in concrete foundation.
2, in order to avoid the machine vibration generated when the work of building, structure, hammer crusher (hammer broken) and the concrete foundation should be pad to the middle of hardwood pallets or other cushioning material.
3, the installation, the center of the motor and the rotor shaft should ensure straight, so as not to affect the elastic sleeve on the coupling and cause premature failure of bearings fever.
 Second, the hammer crusher (hammer broken) of operation:
1, hammer crusher (hammer broken) the preparatory work before starting
  a. Check whether there is oil bearing.
  b. Check all the fasteners are fully tightened.
  c. Check whether the body not easily broken metal or other debris.
  d. Check the hammer and the space between the screen section is normal.
  e. Rotate the rotor to observe is normal. Rotation direction is correct, a hammer and other parts for collision.
2, hammer crusher (hammer broken) starting
  a. The inspection proved that the machine and the transmission part of the normal situation, before starting.
  b. If not found after starting a normal situation, should stop running. Must identify and eliminate the abnormal situation before restarting the crusher.
3, hammer crusher (hammer broken) the use of
  a. After the normal operation of crusher before feeding.
  b. must be broken by adding material uniformly and shall be distributed in the full length of the working parts of the rotor to prevent the sudden increase in motor load.
  c. Check the screen periodically section and, if plug should be immediately removed.
  d. Bearing in normal circumstances, the temperature should be within *5 °C, the maximum temperature not exceeding *0 °C. If more than *0 °C should be immediately stopped, identify the cause to be eliminated.
  e. feeding should be stopped before stopping work, interior materials to be broken completely broken only after the motor off.
Third, the hammer crusher maintenance and adjustments:
1. Coupling on the elastic sleeve is found damaged, should be replaced.
2. The adjustment of product size can change the style of Article sieve, or screen shall be installed in the screen frame embedded at both ends of tank fill block to change the screen section of the gap.
3. Granularity can be adjusted by rotating the eccentric shaft to adjust the hammer and the gap between the screen section.
4. Crusher, if sudden strong vibration, immediately stop and identify the cause and eliminate, and then start hammer crusher, hammer in the side impact part of the wear and tear, you can reverse the other side to use.
5. Assembly or replacement of a hammer, must maintain the balance of the rotor. Hammer hammer axis of each row of the total mass should correspond to hammer hammer axis equal to the total mass of the total deviation of no more than 1 *0g. Not a single hammer mass deviation ± 0.5kg.

Shanghai Golden machine service commitment:

Pre-sale service  of   iron ore  hammer crusher:
We send experienced engineers to your country  ,who  selects  the site of the project and make the process design  according to your project specific conditions and special requirements. then design and manufacture the best machines  for your project , and make sure the machines  meets your project requirements  to the maximum and  meets the upgrade space  of  production increasement in the future, and we  

The sale of services:
Accompany you to complete the acceptance of the equipment, and help draw up specific construction schemes and detailed process

After-sales service  of   iron ore  hammer crusher:

The company send the experienced engineer to on-site guidance equipment installation, commissioning and train  
professional technical personnels for you.

Quality assurance: except vulnerable parts , quality assurance for one year and lifelong maintenance !

Durable,not expensive   iron ore  hammer crusher