Product Description

The REMTECH ROD is an oxygen/arc exothermic cutting electrode. It can be used with any collet equipped underwater cutting torch such as REMTECH*2 Torch or Broco BR**2 Underwater Cutting Torch. The REMTECH ROD must be provided with a constant oxygen supply at adequate pressure and flow rate for its working depthand may be used at a maximum efficiency by providing a DC electric current on straight polarity (negative electrode) at proper amperage for its working depth The REMTECH ROD may be used with a *0% decrease in efficiency by providing the necessary oxygen supply and simply starting combustion with the spark energy of a **- volt battery in momentary contact. The REMTECH*2 slice cutting system can cut, burn or pierce virtually any metallic, non-metallic or composite material. The system cuts through hard-to-cut materials such as stainless steels, cast iron, aluminium, magnesium plus many other ferrous and non-ferrous metals, even when it is caked with mud, rust or other corrosion. It will cut through slag and refractory materials and can punch through concrete or brick. The REMTECH*2 slice is a must for maintenance and repair departments, it can remove headless bolts and frozen pins, cut insulated pipes and ducting, cut through coated structural steel, burn through bridge steel and decking, cut concrete lined pipes, cut through or remove hardfacing from buckets and wear surfaces plus many other tasks. Because the REMTECH*2 slice system needs no pre-heat, you can start cutting sooner and finish the job faster. The REMTECH*2 slice system works by feeding oxygen and electrical power through a patented slice exothermic cutting rod, you supply oxygen and a *2 volt battery or welding machine (cc). The battery gives you fast ignition and portability, the welding machine lets you maintain a continuous arc (up to **0 amps) with conductive materials for a cutting temperature of over ***0°c.