Product Description

GsmAlarm***0 can be used to protect houses, apartments, cottages and to manage electrical devices (heating, ventilation systems, GsmAlarm***0 can be used for protection of houses, apartments, cottages and other buildings. In the case of trespass of the protected zone GsmAlarm***0, depending on the programmed system operating algorithm, can switch the siren on, call and send SMS messages to five users and transfer information to the alarm monitoring station by Contact ID protocol through GSM voice call. User answers the call, can listen, what is going on in the unit and control the system using his mobile phone keypad (through DTMF tones). GsmAlarm***0 has 3 (4, if siren is not used) programmable outputs, intended for remote control of different devices. User can turn on/off heating, ventilation or lighting systems etc, by using his mobile phone just by typing a *-digit code or sending SMS to the control device. Device works perfect for remote control of automated gates, fences and electromagnetic door locks.In order to open the gate, user calls GsmAlarm***0 number. Then GsmAlarm***0 checks the callers number in the list of programmed user numbers and in the case of positive find, switches on the gate control device and cancels the call automatically. **0 users are able to control the gate. Up to 4 keypads can be connected to GsmAlarm***0. By using the keypad users can arm or disarm the system and configure system parameters. Following keypad LED indicators you can determine protected unit state, system mode etc. The system is controlled by iButton (also known as DALLAS) keys. Several control functions can be assigned to each key. Example: a user can activate a protection mode and a controllable output by touching the contact with the key. A user name can be assigned to each key (as well as to a keypad code) that will be indicated in SMS messages. Up to *0 iButton keys can be programmed. If keypad or iButton keys are not used, the system may be armed and disarmed by a simple switch or a short free call. The installation is controlled exclusively from the user telephone. If the system receives a call, coming not from the user's phone, the call is immediately interrupted and the user is sent an SMS message, specifying the caller's phone number. The user is also informed by an SMS message about loss and restoration of AC mains power supply. The system answers only to the numbers programmed. If the system receives a call, coming not from the user's phone, the call is immediately interrupted and the user is sent SMS, specifying the caller's phone number. SMS messages are also sent to users in case of power loss and restoration. The system has temperature measurement possibility. Up to 6 temperature sensors can be connected to GsmAlarm***0 device. If temperature exceeds or subsides programmed range, system sends SMS to user(s), relevant programmable output can be activated/ deactivated. *4 hour timer enables activation/deactivation of programmable output, arming or disarming, receiving SMS messages with protected object state information on a desired time. The system has capability to detect intentional jamming of GSM. The siren is activated upon detection of the jamming signal, and the user is informed thereof by an SMS message about it after clearing of GSM jamming signal. The message indicates the jamming onset time. GsmAlarm***0 parameters may be set via a computer using the GSM alarm configuration tool GAPROG. The module is accessible via an USB port or over the internet through GPRS channel. If a computer is unavailable, the system is set up by a keypad or SMS messages.