Product Description

Characteristics

Designed according to the debugging and repair requirements of lots electronic engineers. 

Contains a built-in-lithium battery and works without external power supply                       

Oscilloscope and Multimeter 2 in 1 function, Easy for carrying, especially for field application                                       

Three Trigger System Mode: Auto, Normal and Single                                          

Lock waveform on the screen and save non-periodical signal

Technologyfeatures

Scope indicator:

Input coupling: AC,DC

Input impedance: 1MΩ*2%   *0pF*5pF

The maximum voltage: *0 v (X1 probe); **0 v (probe X*0) measurable voltage **0 v; (probe X**0) ***0 v voltage can be obtained

Probe attenuation: 1X,*0X

Set the probe attenuation factor: 1X,*0X,**0X

Sampling Method: Real-time sampling, random sampling

Memory depth: *6K

Acquisition Mode: Sample, Peak Detect

Vertical Sensitivity: *0mV*5V (Probe 1X), **0mV**0V (probe *0X), 1V**0V (probe **0X) (1, 2. 5, 5 step)

Vertical accuracy: +/*3%

Vertical resolution: 8bit

Bandwidth: *0MHz

Real-time sampling rate: **0MSa/s

Horizontal scan range: *0 ns - *0 ms (1,2.5, step 5), ****5 s ms Scan (Scan)

Three Trigger System Mode: Auto, Normal and Single

Type: Rising edge trigger, falling edge trigger

Automatic detection: Support (*0Hz**0MHz)

Math:CH1+CH2,CH*-CH2,CH*-CH1

Cursor measurements: Support time and voltage cursors

Measure: Amplitude, frequency, duty cycle, cycle

Multimeter indicator:

Max display ***9

DCV: **0.0mV/6.**0V/*0.*0V/**0.0V/***0V

ACV:**0.0mV/6.**0V/*0.*0V/**0.0V/**0V

DCA: *0.*0mA/**0.0mA /6.**0A/*0.*0A

ACA: *0.*0mA/**0.0mA /6.**0A/*0.*0A

OHM: **0.0Ω/6.**0kΩ/*0.*0kΩ/**0.0kΩ/6.**0MΩ/*0.*0MΩ 

Cap:  *0.*0nF/**0.0nF/4.**0uF/*0.*0uF/**0.*0uF/***0uF

Diode Testing: 0V~2.0V

Continuity Buzzer: Below *0Ω~**0.0Ω

Generaldescription

Display:4.3 -inch **-bit true color TFT **0 * **2   

Low-Voltage Display

Overload protection

Data Hold

Back Light

Power supply: Section ***0 + mA lithium batteries (single battery for 4 hours)

Product size: **0X**8X*7mm

Product Weight: Around **0g

Standard Accessories:meter (incl. battery) gift box, test lead, manual, Oscilloscope Accessories (hook pin & probe & Alligator Clip & Battery charger)