1. Technical parameters

Voltage (V): **0V

Frequency (Hz): *0Hz

Power (P): **0W

Welding speed (V): 0.**5m/min

Heating temperature (T): ****0°C

Thickness of material to be welded: 0.2mm*1.5mm

Overlap width: **0mm

Welding width: *2.5mm×2, interior cavity *2mm

Seam strength: ≥*5% base material (tensile resistant in shear direction) ,complete machine

2. Precautions

1). For correct operation, please carefully read this instruction.

2). Use with grounded *-cords mains cable and socket (socket with *0A capacity. On the corresponding welder, phase L connected to live wire, N to zero line, phase to grounded protection line), plug will not be modified without prior permission.

3). For good welding quality, please assign specified personnel for operation.

4). Pressure roller will not engage on free running.

5). Do not operate when it is exposed to water to prevent inferior quality.

6). The machine has been regulated before leaving factory. Please do not adjust it at will.

7). Circuit board in control box is live with electricity, do not remove it without prior notice to authorized personnel.

8). Preheat for *0 minutes before start up if machine has been long unused or exposed to moisture.

9). Modifications may be made for continuous improvement, without prior notice.