Product Description

LED Sync Dimmer with RF remote
RFBT***-DIM adopts the most advanced PWM (Pulse Width Modulation) digital dimming technology, especially design for single color led strip. For instance, point source of light, flexible light strip, led modules, led strings and so on. Belong to low-voltage DC power and output with two interfaces, including V+ is the positive interfaces, the other one for the negative interface. Meanwhile, you can turn on/off, adjust brightness for different lighting effects through RF *4keys remote control. In addition, It is convenient to use RJ*5 connector to connect the multiple controllers together, and achieve the synchronization function of thousands meters led strips. In theory, they can be connected numerous.
 
Product Feature

• Designed for single color constant voltage LED lights, Working voltage DC****4V.
• High watt output design, up to 1**5A/ **0W.
• Memory function, each time power-on reserve the mode which stop in the last power-down.
• Easy connection to achieve multiple dimmers sync-work by RJ*5 terminal.

• Adopts RF *4keys remote control with fashion appearance, no need line-of-sight. Control range up to *0 meters.
• Long-press the brightness and speed key can get the fast adjustment, convenient for operation.

• Connect the load wire at first, followed by the power wire; Please ensure short circuit can not occur between wires before turning on the power；
• Adopts RF remote technology, *4 s in total.

• Step 1: Pressing key set and hold on, power on the controller, the load LEDs will be *0% brightness white as responding.
• Step 2: Continuously to press the keyMode key for 3 times within 5 seconds after step 1 ,the brightness of LEDs will change from *5% **0% as responding.
• Code learning successfully, the LEDs will be back to the status before the power off, and the receiver only can be control by the remote.
• If not, please re-operate from step 1 to 2.

• Step 1: Pressing key set and hold on, power on the controller, the load LEDs will be *0% brightness white as responding.
• Step 2: Continuously to pressDelay 3 times within 5 seconds after step 1 ,the brightness of LEDs will change from *5% **0% as responding.
• Code clearing successfully, the LEDs will be back to the status before the power off, and the receiver can be controlled by any remote control(any one the same remote control can be used to clear the code).
• If not, please re-operate from step 1 to 2.