Product Description

Mazut M-*00 Specs, GOST ***85-*5
 
1. Ash Content, not more %........................................................................0.*4
2. Mass fraction of sulphur, not more % low - sulphur - residual - oil ……...……….0.5
3. Temperature of the flash, not less °C in the closed crucible °C ……….*5 min in the open crucible °C ……………………**0 min
4. The temperature of solidification, not higher °C …………………………*5
5. Kinematics viscosity ………………………………………..**8 max
6. Water content % ………………………………………… …0.5
7. Mechanical impurities Lower than % ……………………  0.1
8. Acidity Lower than 5 mg KOH/ ……………………………**0ml
9. Alkalinity…………………………  ………………………….nil
*0. Gross Calorific Value Kcal/kg / KJ/kg Min ……………  .***0/****0
*1. Density at *5.0 °C Kg/……………………………            0.**00-0.***0
*2. Hydrogen Sulfide Content (H2S) pom …………………0.5 max
*3. Carbon Residual Lower than % …………………… … .7
*4. Vanadium (V) ppm ……………………………………….*3
*5. Aluminium (Al) ppm ………………………………………5
*6. Silikon (Si) ppm …………………………………………..*2
*7. Nickel (Ni) ppm …………………………………  ………*9
*8. Asphaltenes m/m % ………………………… …………3.6
*9. Destilation at 4 mm Hg
Extracted to **0 mm Hg
Initial Boiling Point °C ………………………………………………………………..**6
5% recovered °C ……………………………………………………………………..**9
*0% recovered °C ……………………………………………………………………**0
*0% recovered °C ……………………………………………………………………**8
*0% recovered °C ……………………………………………………………………**5
*0% recovered °C ……………………………………………………………………**2
*0% recovered °C ……………………………………………………………………**4
*0% recovered °C ……………………………………………………………………**8
*5% recovered °C ……………………………………………………………………**5
*0% recovered °C -
*0% recovered °C -
Final Boiling point °C …………………………………………………………….......**0
Percent Recovered vol % ……………………………………………………………*8
Residue vol %.....................................................................................................*2
Total Nitrogen m/m % ………………………………………………………………..0.**2
*0. Sodium (Na) ppm ………………………………………………………………..*5