Product Description

1.Brief introduction

TS***3, one master to *3 targets duplicator, is designed for duplicating SD/TF card for mass production, which can support the mix duplicating task of SD card and TF card.It can provide the maximum flexibility and convenience for the use of the users.

TS***3 has come onto the market timely with the high speed bandwidth.The copying speed can reach up to 1.5GB/min (which varies depending on cards R/W performance) within transfer rate standard, which can provide the best solution for mass duplicating task.

The device supports many functions, including SMART COPY, FULL COPY, ERASE, QUICK ERASE and other auxiliary system setting.Multi-choice for setting is powerful to meet with different requirement of user.

This product also can provide working database through remote control software Tmonitor on PC, including producing order information, product information, worker ID, and working mode and so on.

2.Feature of product

* Support high transfer speed 1.5GB/min for each port.
* Supports Hi-level SHA***6 data transformation comparing.
* Support most of the file system (FAT*6/*2, NTFS, Linux EXT2/EXT3/EXT4) to do quick copy, and reduce copy time for mass production.
* Support all copy functions including full and quick data copy, and also provide strictly bit to bit comparing.
* Support target capacity check function, can screen out the target whose capacity is different with source.
* Provide intelligential 9 for working system controlling and recording working information.
* Update system firmware use TF/SD card and Powerful technology support team.

Tmonitor FAQ

Q1:The COM port of monitor software had been connected, but can't receive information?
A:Please check whether the serial port is connected.Second, make sure open the serial number is correct.

Q2:There isn't serial number on the monitor software?
A:First of all, to confirm whether the program with administrator privileges to run, because involves reading system serial number, need administrator privileges.Secondly, whether had installed a serial port driver, and check whether the serial port cable is good.

Q3:No data when user query?
A:First of all, confirm that time choose reasonable, procedural default time for program startup time, you can change time to query;Second, determine whether there is data, only when copying machine finishes the whole work process, It will record the data.

Q4:What can to do if forget the path of saving data?
A:Program will automatically remember the last time save the file directory, can use the "save as" or "export" to see the last save path.After the success of the program in the save the file, will automatically open the save file folder, and select the saved file.

Q5:    How to monitor more than one duplicator?
A:Multiple copies of the software folder, each corresponding to one copy machine;Different machine can be set different name in the configuration file names to distinguish each copy machine.The path of the database can be set to the same path, so that all data will be recorded in the same database file, easy to maintain.By querying the different machine alias name you can judge the data of corresponding machine.

Q6:How to duplicate different models on the same copying machine?
A:Can be done by setting the machine alias name, such as copying A model in the morning, you can set up machine alias name as A.Afternoon copy B model, change model name as B.When switch, need to disconnect serial port connection, please connect when the setting is ok.