Product Description

Metallized Ceramic tube
1.Good electrical insulation
2.Excellent wear resistance
3.Excellent corrosion resistance

Mo/Mn metallized ceramic tube

High Alumina Metallized Ceramic Tube Insulator

Electrical Ceramic Insulator

Al2O3 Ceramic Insulator

Ceramic with metallization

Innovacera suppliers precision Mo/Mn Metallized Ceramic Tube in alumium oxide ceramics for the military,medical and aerospace industries.Through spray,needle and brush coatings or screen printing our capabilities allow us to metallized on flat,cylindrical and complex ceramic bodies. Moly-Manganese is the typical base coat materials used for metallization.

Descriptions of Metallization Processing:

Metallization Processing
(See Process Description Below)

Outer Diameter and Inner Diameter Banding

Brush

Screen Printing

Spray

Needle

Base Metallization Materials

Moly Manganese

Tungsten Manganese

Moly Tungsten Manganese

Materials for Metallization

Aluminum Oxide

Beryllium Oxide (Restrictions Apply)

Metallization Characteristics/Benefits

Low Temperature Firing

Universally Applicable

Process Speed

Uniform Coating, Thickness and Density

No substrate deformation

Metallization Equipment

Domestic Furnaces

Industry Focus

Department of Defense

Department of Energy

Solar Product Manufacturing

Aerospace

Biomedical

Communications

Computer and Electronics

Vacuum Electronics

Medical

Military

Semiconductor

Optical

Intended Applications for Metallization Products

Traveling Wave Tubes

Vacuum Electronic Devices

Medical Devices

Photon Machines

Neutron Generators

X-Ray Tubes

Klystrons

High Vacuum Feed Through

Relay Insulators

E-Beam Technology

Available Metallization&Plating Specifications:

Available Ceramic Compositions Al2O3 *4%,*7%,*9.5%
Available Metallization Materials Mo/Mn
Metallization Thickness *5±*0um
Available Plating Materials Ni/Ag/Au
Plating Thickness ***0um

Material Specifications&Properties

We can supply the products according to customer's drawings, samples and performance requirements.

Overall Production Process:

Factory Tour:

1.Forming Method: Cold Isostatic Pressing:

In this process the powder is filled into a flexable mold generally prepared from rubber and then subjected to isostatic pressure via a fluid in a pressure chamber.

The rubber moulds rae relatively easy to produce but the process cycle itself is slow and so the method is appropriate for small series of components.

2.CNC Machining:

3.Sintering:

4.Metallization:

5. Glazing:

Quality Control/Assurance Standard:

We are ISO certified: ISO***1:***8 ISO****1:***4 OHSAS****1:***9

The constant goal of Innovacera is a superior level of quality and sevice at competitive prices. Particular attention is given to the production of individual customer parts for both large and small runs. We implement a very sophisticated Quality Control process which we have our own customers certify. All parts that pass through our facility are visually and dimensionally inspected as well as calibrated. Our engineering staff is available for counsel and recommendations that will satisfy your ceramic requirements.

Superior quality of products with reliance is our prime consideration.

Feel free to contact us if you need any other assistance about our products.

We care and provide what you want!