Product Description

The FHC*****3S*0A**-LD5 is an Ethernet media converter that converts media transmission between UTP Copper cablings and fiber SFP (Small Form-Factor Pluggable) Transceivers. The FHC*****3S*0A**-LD5 copper-to-fiber module is available in *0/**0Mbps Fast Ethernet types, allowing seamless integration between Fast Ethernet networks using unshielded twisted pair (UTP) copper cabling, and **0M fiber networks. - Conversion between different transmission speeds and media types - Standalone and compact hardware design - Auto-negotiating Ethernet port (Speed and Half/Full Duplex) - Auto-crossover Ethernet port (Supports Auto MDI/MDI-X) - Standard open Fiber slots for SFP Transceiver - Built-in Link Loss Forwarding Technology - Easy Installation, Easy Troubleshooting Specification Standard Compliance ·IEEE**2.3 *0BASE-T ·IEEE**2.3u **0BASE-TX ·IEEE**2.3x Flow Control and Back pressure Connector and Interface ·Fiber: SFP 3.3V ·RJ**5 Socket: CAT*5 (*0/**0Mbps) Twisted Pair cable Auto MDI/MDI-X and Auto- Negotiation Function Support Switch Architecture ·Store and Forward Fiber Parameters ·Fiber Core o Multi-Mode (*2.5/**5um, *0/**5um)/Single-Mode (8/**5um, *0/**5um) ·Wavelength: o ***0nm (Multi-mode ) / ***0nm (Single-mode) ·Fiber Distance: o Multi-Mode Fiber (2KM) / Single-Mode Fiber (*****0 KM) Link Loose Forward ·TX to Fiber: If TX port link down, then converter will forced fiber to link down. · Fiber to TX: If Fiber port link down, the media converter will forced TX port to link down. DIP Switch ·DIP Switch 1: UTP auto-Negotiation / **0Mbps Full Duplex mode ·DIP Switch 2: Fiber Full/Half duplex ·DIP Switch 3: LLF ( Link Lose Forwarding ) Disable / Enable ·DIP Switch 4: Switch converter / Pure converter mode LED Indication ·FEF, SPD, FX-LINK, TX-LINK, PWR, FDX Power ·Stand-alone (external adapter):DC 5V / 1A Dimension ·**0 (L) x *2 (W) x *6(H) mm, power external Operation Environment ·Operating temperature: 0oC ~ *0oC ·Storage temperature: - *0oC ~ *5oC ·Operati