Function

NC*2 digital nitrogen controller is used to control the filling of dry air into the cabinet. So the desired relative humidity in the nitrogen cabinet/nitrogen box can be reached. For example, if 5%RH is the required condition, then the dry air will stop to fill when <5%RH is reached. The dry air can be nitrogen, CO2 or inert gas. However, nitrogen is the most frequently used dry air for a nitrogen cabinet/nitrogen box. Traditional nitrogen cabinet/nitrogen box allows the N2 to fill all the time continuously. After NC*2 Nitrogen Controller is adapted, *0~*0% of N2 can be saved right away.

 

Specification

Operation Range: **0~*0℃, 0~*9%RH
Precision of Temperature Sensor: ±1.0℃
Precision of Humidity Sensor: ±3%RH
Resolution of Temperature: 0.1℃
Resolution of Humidity: 0.1%RH
Nitrogen Controller Dimension: W**0*D**0*H*0mm
Nitrogen Controller Weight: 1.8kgs
Nitrogen Controller Power: **0V/**0V (select voltage in advance)

 

Features

Energy Saving: Dry air will no longer fill continuously. It consumes only *0W/hour while the filling solenoid of NC*2 is activated.
Easy to install: Any traditional nitrogen cabinet can be upgraded by adding NC*2 within *0 minutes. Huge waste of nitrogen can be saved permanently. 
Sensor Calibration reminding: NC*2 can be connected to a PC through intranet network (option). All of the data of temperature and relative humidity will be recorded and the fluctuation will be shown in the graph.
Data Recording: It is important to verify that the condition of storage meets the regulation of J-STD***3B. All NC2s are equipped with Humidity Manager V2 software for this application. The users can connect notebook PCs directly to the RS**2 port of NC*2 to acquire the data or use our data logger to record the data through our software. With our data recording function, the historical fluctuation of relative humidity and temperature can be shown clearly in the graph. The floor life of the Moisture Sensitive Devices can also be calculated in the software . This uniquely patented function can easily verify if the SMD packages are stored at proper condition. It is very convenient for those who carry out quality assurance procedures.

Utmost Fresh News
We participate in the electronic show: Productronica in Munich, Germany on Nov.*0th**3th,***5. 
It is our privilege to meet you personally on the fair.
Cordially welcome you to vist our booth on: A3. **0 !