Product Description

Description
OK***0 Epoxy floor grinding machine is a versatile tool, widely used in surface treatment. They can be used for cleaning, flattening and smoothing concrete surfaces，removing coating, mastics, epoxies, urethane, adhesive residues, or paint, thin-film coatings，polishing concrete and natural stone.
1. Grinding of standard concrete foundation.
2. Grinding of hard concrete foundation.
3. Grinding of Epoxy resin coating.
4. Removal of old coating.
5. Concrete surface grinding wool processing.
6. Concrete concave convex and fragile layer smooth processing.
Features
1. Voltage **0V can meet requirements of most places. 
2. The low center of gravity makes it easy to operate and working stably.
3. Different grinding head can be optional according requirements.
4. Grinding and vacuuming can work simultaneously with vacuum.
5. The diamond grinding head is especially suitable for grinding low intensity plane and epoxy mortar, putty layer.
6. Resin sheet is used for polishing and grinding concrete.
7. Price low and quality high.
Technical parameters
Model: OK***0
Weight: **0KG
Power of main motor: 3KW
Working Voltage: **0V
Rotational speed: **0r/min
Dust-suction power: **0W
Working width: **0mm
Grinding head: 3 pieces
Packing Dimension: ***0***0***6mm
Motor brand: Domestic famous motor
When OUKE OK***0 concrete floor grinder machine is out of the factory, the product qualification certificate and the product instruction will be together again, in addition, you can also get a grinding disc, three diamond grinding heads, a sand tray, a piece of sand paper. Use sand paper can roughen the concrete ground. Diamond grinding head can grind and flat concrete floor.
Sand cover paper according to the thickness can be divided into *0mm,*0mm,*0mm,etc. The most commonly used is *0mm and *0mm.
Relatively flat surface can be directly used *0mm mesh sand paper burnish, then the epoxy floor. After floor paint on purpose can use *0mm or *0mm sand cover paper wool.
The lifetime of diamond grinding head: ********0 square meter
The lifetime of sand paper: ******0 square meter
Instructions:
1. Remove the machine from the box and lay it flat.
2. Remove the motor cover and check the belt tightness. If the belt is loose, pressed down the handle to tilt the chassis, chassis four fixing screws relax, tightness and sheet metal hand tightened following the push bolt until it reaches the specified, then the shell is installed.
3. Chassis tilt, exposed triangular discs, the grinding head is installed on a triangular plate is fixed, then the outer skirt to the appropriate location.
4. Put the machine flat, ensure three diamond grinding heads of the triangle plate and rear wheels in a plane.
5. Plug in power supply, rotating switch starting the machine. If the dust is out, then the switch is rotated to the middle stop stat, the rotation goes to the opposite direction and then run normally.
6. After the machine starts, according to the ground strength and processing effect to choose the appropriate speed uniform propulsion.
7.  Mechanical operation about *0 minutes can be stopped mechanically, then reverse to the dust on the filter removed, in order to achieve the better effect of the dust. Running *0 minutes will mechanical stop, turn on the vacuum cleaner, silo dust clean.
8.  In operation, there is any abnormal phenomenon please stop the machine immediately, then check the end can be re used.