MODEL |
IPC****0(T) optional
models |
Display |
7 inch touch screen , **0x **0
resolution |
Communication
Port |
*0/**0M
adjustable |
IP Camera |
Customized:, (IPC-HFW***0P),
(DS*2CD***-E1), (SUZ****0), (TD-NC***0S2), (IPC**0L),
(HICC****0T), (IP****-BC**3MP/IRS****3MP), (IPC),
BY****0Q.etc |
Video IN/OUT |
1 channel BNC Input & 1 channel
Output, Support PAL and
NTSC |
Video Level test |
Video Level
Meter |
Video PEAK level, SYNC level, Color
Burst measurement |
DV*2V Output |
Output temporary *2V power for
camera, the current is near 1A |
Audio Input |
Test the pickup and other audio
equipment on the front-end |
PTZ Protocol |
Support more than *0 protocols,
such as PELCO-D/P, Samsung, Panasonic, Lilin, Yaan, etc. Baud
rate:*********0 bps, Support RS**2 and RS**5 |
Color Bar
Generator |
Output one channel PAL/NTSC color
bar video signal for testing monitor or video cable. (red, green,
blue, white and black color) |
UTP cable test |
Test UTP cable connection status
and display in the screen. Read the number of the test
box. |
Data Monitor |
Captures and analyzes the command
data from controlling device |
Photograph video record and
playback |
Snapshot, video record,
view the storage file in the SD card.
|
IP scan、Link monitor、PING test |
IP scan |
Find out the connected IP camera or
the other network equipment IP address quickly. |
Link monitor |
Check the IP address whether
available |
PING testing |
Test IP camera or Ethernet port of
the other network equipment whether work normally, and check the IP
address |
Cable scan |
Cable scan |
Search the cable by the audio
signal |
Poe tester |
PoE tester |
Display the power supply voltage
and cable connection states |
Digital
Multimeter |
AC/DC Voltage |
****0V auto/manual range, the min
resolution is 0.1mV |
AC/DC current |
**0.0uA , 6.**0mA, *6.*0mA ,
**0.0mA, *0.*0A |
Resistance |
**0.0Ω, 6.**0kΩ, *6.*0kΩ, **0.0kΩ,
6.**0MΩ, *6.*0MΩ |
Capacitance |
6.6nf~****0uF, the min resolution is
1pf |
Diode |
0~2V forward voltage, the min
resolution is 1mV |
Data hold |
Hold the measurement optical power
value |
Relative
measurement |
display the difference value of the
first testing result |
Continuity
testing |
Built-in buzzer will sound, if
resistance is lower than *0 Ω |
Testing speed |
3 times/ seconds |
Data range |
****0~****0 |
Optical power
meter |
Calibrated
Wavelength(nm) |
**0/***0/***0/***0/***0/***5nm |
Power range(dBm) |
**0~**0dBm |
Sensitivity(nW) |
0.**1nW |
Connector type |
FC/PC |
Data hold |
Display data
hold |
Relative
measurement |
Display the measurement
value |
Optical Power
Meter |
Wavelength(nm):**0/***0/***0/***0/***0/***5nm
Measure range
(dBm):**0~**0dBm |
Visual Fault
Locator |
Test fibers bending and breakage
(SM and MM fiber) |
TDR Tester |
breakpoint and short circuit
measurement(BNC cable, telephone cable) |
POWER |
Power Adapter |
DC 5V(2.**3A) |
Battery |
Built-in 3.7V Lithium polymer
battery ,****0mAh |
Rechargeable |
After charging ***0 hour, working
time lasts *6 hours |
Low Consumption |
Energy saving technology, the
battery icon real-time display |
Parameter |
Operation
setting |
Capacitive touch screen.
English/Chinese OSD menu |
Auto off |
***0 (mins) |
Keytone |
On/Off |
General |
Working
Temperature |
**0℃**-**0℃ |
Working Humidity |
*0%**0% |
Dimensions |
**1***2**2mm/1.*6KGs |
|
|
|
|
|
|