Product Description

Pneumatic cylinder: Attention for installation & operation Before installation, the cylinder should be first subjected to preliminary operation under unload condition and accepted as qualified. Choose the installation types according to the service conditions and note the following clauses with care during installation. Apply force should be on the same plane when mounting the tongue and intermediate shaft pin. B.When mounting the flange , the apply force and the support center should be on the same shaft axis, The flange and the flange the fulcrum bearing should with connected that the flange face is subjected to the apply force but not the set screw subjected to the tensile force. Air cylinder piston rod should not be subjected to unbalance loading or lateral load. The air cylinder with over-length travel should be equipped with supporting device or guide means. Before connecting the air cylinder to the pipe, the pipe should be first cleaned out so as to prevent waste from entering the air cylinder. Fastenings should be often checked up in order to avoid losing. If it is necessary, the throttle-valve can be regulated to adjust the buffer effect and protect the piston from colliding with the cylinder head, which may damage the parts.