Product Description

◆ Features
1. Simplicity of Operation
  - Air and fuel is automatically mixed in the *2V air pump. So it starts with eh simply with the push of all .
2. Durability of the Machine
  - This machine is made almost entirely of Stainless Steel or polyethylene (chemical tank, fuel tank etc)
    which prevents corrosion due to chemicals, and fuels
3. RE chargeable Battery
  - It is a non-liquid, *2V DC, rechargeable Battery, which does not degrade and also avoids the user the hassle of constant battery changes.
4. Little Heat Generation
  - The machine has been designed so it is cooled by two air-intake valves, that are connected to the fuel ignition part of the machine.
    This allows the machine to remain cool during use.
5. Strong Igniter
  - The igniter uses a *2V DC battery so that starting the machine is quick and easy.
6. Easily repaired
  - All components are designed for easy assembly / disassembly, the fuel line is made of a transparent material,
    and the spark plug is easily seen, so it is easy to spot problems when they happen.

◆ How to Use

1. items to be checked before use

  a. Add the fuel and chemicals and then check that the tank cap is closed tightly, this guarantees that there will be not air leakage,

      which would cause the machine not to work.

  b. Battery charge : if you are not using the machine in the semi-automatic mode then you should check the **0V and **0V

      power switch on the back of the machine. It should be in the middle position and then attach it to the power outlet.

      To charge the machine, connect the charger jack to the charging outlet of the machine’s main unit. The red light will go on during

      charging and then a green light will blink when the process is complete. The entire process takes between 4~5 hours.

2. Starting

  a. Automatic

      Open the fuel valve in counter clockwise direction, and push the start once 3 seconds. If the machine fails to start then you

      should close the fuel valve by turning it in a clockwise direction and pressing the start until you hear a ‘cough’ like sound.

      This makes sure that any excess fuel in the carburetor is gone.

      Then repeat the steps to operate the machine.

   b. Manual

      Open the fuel valve in a counter clockwise direction and operate the machine by rapidly pushing the pressure pump *0~*5 times

      while pressing its . If the machine fails to start then you first should close the fuel valve and then continually push the

      pressure pump several times repeatedly while pressing its until you hear a ‘cough’ like sound, which tells you that the

      carburetor has been cleared of any excess fuel.

      Then repeat the steps to operate the machine.

3. How to Spray the Chemicals

  a. Open the chemical valve while machine is running

  b. Regulate the desired quantity of chemicals by adjusting the chemical control valve and then begin spraying.

4. How to Stop the Machine

  a. Close the chemical valve

  b. You should wait for 5 or 6 seconds.

  c. Close the fuel valve by turning it in a clockwise direction.

  d. Remove any air by turning the chemical cap.

      (Caution : the machine has the potential of causing a fire if the above steps are not conducted after every use.)

5. What to do when use is complete

  a. Clean the thermal pipe with the cleaning rod. Insert the rod then turn it in a clockwise motion, in order to prevent damage to the

      machine.

  b. Charge the battery

  c. if carbon has collected in the spark plug, take out the plug and remove the carbon.

      (when replacing the plug make sure it maintains a 2~3m gap.)

◆ Storage

 1. Completely empty the chemical and fuel tanks, then clean them thoroughly by the following method. Fill with acetone liquid,

     screw the caps completely shut and leave for one hour. Put light oil, or water in the chemical tank then operate it by spraying.

     Then clean nay remaining sediment in the chemical tank.

 2. Clean the reside from the chemicals by using an acetone liquid. Clean the residue due to oil by using gasoline.

 3. Charge the Battery. When the battery has not been used over an extended time it should be recharged every 2 or 3 months.

 4. Set it in and upright position (with the start pointing towards the ceiling) and cover it with vinyl to protect it from dirt and other

     foreign materials.

◆ Caution

 1. Do not add gasoline or chemicals into the machine while it is hot.

 2. When spraying poisonous chemicals, wear a mask. If you are going to reuse the mask make sure it is thoroughly cleaned after

     every use.

 3. When the machine is not running, turn the chemical valve and fuel valve to the close positions because there is possibility of fire.

 4. Charge the battery after use.