Product Description

Reasons for high vibration in hammer crusher is a new crusher combining drying and crushing technology.It can be used to dry and crush the soft material, such as chalk,clay, filtered cake of slurry form,and so on. The moisture content of the feed material is no bigger than *0%. It is used to break, dry and calcine the gypsum of industry byproducts and flue gas desulfurization. And at the same time, it has the function of breaking and crushing. The rolling rotor breaks up the material, and then the hot air dry these materials. The airstream brings the crushed and dried material to separation chamber. Then, the fine powder enters into the cyclone tunnel in order to be separated, while the coarse grains return the hammer crusher to be crushed again. In gypsum board industry,the rotor on DSJ Series Drying Hammer Crusher can break up and throw the desulfurized gypsum stag,whose water content is no more than *2%.During this process, the gypsum stag exchanges the heat with the intake hot air of **0℃,and then the max water content of material is 1%,which goes into riser from outlet duct and then hot air takes the material into the process.This machine can aslo be used to dry and crush filtered cake in cement industry and calcium carbide slag in environmental protection.      DSJ Series Drying Hammer Crushers adopt reasonable and reliable process technology,high-quality material and advanced automated processing equipment,which ensures the reliable and steady operation,and convenient maintenance.Each environmental indicators of this equipment are in line with the requirements of the country.      Desulfurized gypsum slag used to be processed through the land fill,which seriously pollutes the environment and uses the farmland.Nowadays,the desulfurized gypsum slag can be used as construction gypsum powder,after being processed by this machine.What's more,its performance is better than that of natural gypsum.It is high-quality raw material to produce gypsum board. DSJ Series Drying Hammer Crushers is suitable for crushing and drying soft or nonabrasive materials, e.g. gypsum, chalk, clay, slurry, filtered cake, etc. It can also break up, dry and calcine industrial byproduct plaster and flue gas desulfurized gypsum. This equipment is of high efficiency and low energy consumption.