Software V11.540 ISUZU TECH 2 Diagnostic Software 32MB Cards

Software version : V11.540, from 1998 to 2011
Display language can be selected according customer's demand
Supporting hybrid and CNG vehicles

Software Language: Czech  Denish German Greekn English  Spanish  Finnish  French Croatian  Hungarian Indonesian Italian Jananese Dutch  Norwegian Portuguese(Bazil)   Russian   Sweden  Thau  Turkey  Traditional Chinese  Simplified Chinese

Package List:

Isuzu Tech2 full set, one unit
Isuzu 24V adatper for truck test,one unit
32mb software card: V11.540, one unit

ISUZU Tech-2 is the same tester GM Technicians use to diagnose GM vehicles. The Vetronix Tech 2 comes with Authentic GM software and provides support for on-board diagnostics on all GM systems 1992 to 2012
Features:
Authentic ISUZU software in the Tech 2 Flash means the most comprehensive diagnostic software available for late model ISUZU vehicles.
Support for on-board diagnostics on all ISUZU systems 1992 thru current year.
Removable hardware modules provide insurance against scan tool obsolescence.
Large, easy-to-read backlit screen.
RS232 & RS485 ports provide the avenue to connect future devices to your Tech 2 Flash.
Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review.
Ability to view the status of vehicle diagnostic tests as they run.
Bi-directional
The authentic ISUZU 1992-current year software will provide full bi-directional control when performing power train, chassis, and body diagnostics.

ISUZU Tech-2 Specifications

Dimensions
 12″×6″×2″
 
Microprocessor
 32 bit, 16 MHz
 
Memory
 32 MB flash type II PCMCIA. Type III slot available for future expansion.
 
Communications
 Integral RS232 communication port.
 
Screen
 3.8″×2.8″ backlit monochrome with full graphics capability: 320×240 pixels. Displays up to 9 vehicle parameters at once 
ISUZU Tech-2 Starter Kit with Candi Module & TIS Kit includes :

Tech-2 Flash Tester
32 MB PCMCIA Card with ISUZU OE Applications
CAN diagnostic interface module(CANdi) and instruction sheet download ( 199.2 kb )
GM aftermarket Expertec TIS software on DVD-ROM disks
Data/Sensor/Trouble Code Manual
DLC Cable, DLC Loopback Adapter
12V Cigarette Lighter Power Cable
SAE 16/19 Adapter
NAO 12/19 Adapter
Battery Power Cable
Storage Case
Tech-2 Users Manual

An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the Tech 2 Flash and a CAN diagnostic interface module. The module connects between the Tech 2 Flashs diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all Isuzu vehicle applications, even those vehicles using other platforms such as OBD I and OBD II.