Product Description
used car/motor/ship oil recycle
machine
Because the waste oil contain too much
contamination, including non-hydrocarbon, alkene, polycyclic
aromatic hydrocarbon, metal hydronium, impurities, metal particles,
asphaltene and colloid etc. and due to the traditional technology
only can refine the waste oil to base oil, can't use directly, so
our company is researching the new technology about distilling
equipment, which can distill all kinds of waste oil into clean oil,
easy to operation, and the lower operation
cost.
1.Working principle of used car/motor/ship oil
recycle machine
This equipment adopt physicochemical actions to
polymerize, passivate, absorb and eliminate impurities and harmful
contamination. We research a new chemical alkaline complex
catalyst, which can restore and regeneration the Waste oil to clean
oil, save the component of the oil.
2. Advantage of used car/motor/ship oil recycle
machine
It's easy to produce waste residue and bad
smelling by traditional vitriol distilling, which will bring
potential secondary pollution, moreover, it's easy to change the
color to black and produce the odor due to the recycled oil react
with the oxygen. But after we use the alkaline complex catalyst
refines the oil, the recycled oil haven't change the color and
haven't create the odor. What's more important, you can use the
resid to be as the fuel to heating the oil, without any pollution.
And the equipment is easy to operate, only **2 workers can control
the equipment.
3. Main components of used car/motor/ship oil
recycle machine
a. Catalyst system: Catalyst Reactor,
blender;
b.. Chemistry treatment system: Chemistry reactor,
blender,oil pump
c. Heating distilling system: distilling tower,
distilling kettle, heater, circle pump;
d. Cooling system: refrigerating equipment, water
pump, water tank, cooler I,cooler II,
Condenser;
e. Vacuum system: Vacuum water receiver, vacuum
pump, vacuum cooler
f. Degasification system: vacuum exhauster,
exhaust fan, degasification plant, water pump,
radiator,deodorizer.
g. oil storage system: distilling storage
tank
h. Control system: all kinds of gauge( vacuum
gauge, pressure gauge etc.) and electricity controller
tank
4. Working Principle of used car/motor/ship oil
recycle machine
A proposal for processing waste lube oil and
industrial oils, using high vacuum distillation technology is
presented here. The various steps involved in the projects are
given below.
Step1: The waste oil is pre-treated and then send
to chemical processing kettle and react with
catalyst.
Step2: This waste oil is approx **0 degree at
0.**8Mpa to have water and some light fractions
separated.
Step3: The temperature is keep rising up to
******0degree at **0Pa , the lighter fractions such as gasoline,
diesel are distilled and cooled and then stored in diesel receiving
tank.
Step4: The undistilled waste oil subjected to high
vacuum, medium temperature in the heated distillation plant, the
light base oil fraction is distilled and cooled and then collected
in the light base oil tank( above **0degree and at a pressure of
**0Pa). The distilled oil will have a viscosity of higher than
SN**0 at ambient.
Step 5: The undistilled waste oil subjected to
high vacuum, high temperature in distillation plant, the heavy base
oil fraction is distilled and cooled and then collected in the base
oil tank ( above **0degree and at a pressure of **0Pa). Distilled
oil approximately higher than SN**0 in
viscosity).
Step6: The distilled oils are clean oil generally
no need further treatment, they are going to be blended with
additives to get finished oils for the automotive and industrial
applications.
Step7: The final residue is semi solid at ambient
and can be processed for manufacturing asphalt, finished to make
off-speck heavy fuel oil or to make greases for slow moving
equipment.
5. Features
1. Easy to operate, low operation cost
2. Environmentally friendly, without secondary
pollution.
3. The equipment can recycle gasoline oil, diesel oil,
engine oil, rubber oil and other lubricant oil to clean
oil.
4. High quality refined oil, no any discoloration caused
by oxidation, no any bad smelling.
5. Low cost contain:
1) only need the catalyst chemical, the cost is less
than US$*0 to refine one ton waste oil.
2) Heat consumption: **5 kcal per ton waste
oil
3) Power consumption: *0Kwh to recycle 1 ton waste
oil
6. High degree of automation.
|
The detail of recycled light oil and heavy oil
|
|
item
|
Heavy base lube oil
|
Light base lube oil
|
|
appearance
|
lucidity
|
lucidity
|
|
color ≤
|
1.5
|
1
|
|
Viscosity(*0degree)mm2/s
|
*9.*7
|
*6.*6
|
|
Viscosity index ≥
|
*6
|
*5
|
|
anti- oxidation **0degree,
min ≥
|
**0
|
**0
|
|
de-emulsification, 5degree,
min
|
5min
|
5min
|
|
Flash point (opening)degee ≥
|
**8
|
**4
|
|
Pour point degree ≤
|
**2
|
**6
|
|
Neutralization value mgKOH/g ≤
|
0.*2
|
0.*2
|
| Country: |
China |
| Model No: |
DIR
|
| FOB Price: |
( Negotiable ) (Negotiable)
Get Latest Price
|
| Place of Origin: |
China |
| Price for Minimum Order: |
- |
| Minimum Order Quantity: |
1 Set |
| Packaging Detail: |
packed in strong wooden case, it is suitable for long distance transport |
| Delivery Time: |
50 workdays |
| Supplying Ability: |
100 Set per Year |
| Payment Type: |
L/C, T/T |
| Product Group : |
diesel oil machine
|
