Product Description

VVDI IMMOPLUS Newest Version: V2.6
Notice:The VVDI IMMO Plus V2.5 can work with VAG commander software, if you want to update to V2.5,please send the serial number,We send you update file by email
(pls do not try to update the  IMMOPLUS to V2.0, otherwise VAG COMMANDER 8.6 and TAG KEY TOOL software are not able to use after update)
 VVDI 2.6 update instruction:
1.This version need the newest firmware support
2.New window for engine control unit, Fix bug for med9, edc*6
3.Fix diagnostics bug for ABS, add chinese diagnostics data.
4.Add immo support for some A3/TT/R8 use CDC*2xx
5.bugfix

  VVDI immoplus 2.6V new update features and function:

1 Add uds protocol measurements, matching, component test, adding CAN, K-line protocol data stream details 

2 Repair bug that can not read the password, add med9.5.*0 engine PIN, CS read 

3 Repair A6L/Q7 4 generations OEM remote control can not be used to generate the key bug, change the key ways to do 

4 repair Touareg *-generation anti-theft key learning bug 

5 Add RB8 instrument theft status updates 

6 Add 7bytes unlocking Magotan / CC Key in  chip - tool  according to , find 7 bytes and generate dealers keys  

7.bugfix

VVDI Includes 3 Parts: ImmoPlus, VAG Commander software, Tag Key Tool function.
1. ImmoPlus supports prepare delaer key for VAG new cars. Such as VW 4th/5th immobilizer. Even the car lost all working key or with keyless.
2. VAG Commander Software can do diagonistics for VAG cars. Also change KM, read PIN, learning key etc.
3. Tag Key Tool is used for chipset read/write. Make key with eeprom dump file etc.

VVDI Software V2.6 Update

1.Fix bug for some MED*7/EDC*7 loadeeprom/flash get PIN,CS,MAC
2.Fix bug for some A6/Q7 OEM key and wirte A6 OEM immo info.
3.Add more car auto detect
4.bugfix

VVDI Hardware V2.0 Update:

1.This software need newest firmware support. Please connect your dealer for help.

2.Add tag support. Support *8,Hitag,PCF***5,8E, *3, 4C, 4D, T5 etc.

3.Fix bug OBDII read bcm2 data while lost all key.

4.New window added. Make the software more convenient.

5.Fix bug read PIN from engine control unit. Support more types and enhance the speed read PIN.

6.Fix bug for adapt Immo3/Immo4 ECU bug

7.bugfix
 

Attention:
1. After you update your VVDI Hardware to V2.0. you can not use the previous VAG8.6 Software and the Tag Key Tool Software. You can only use the new software. 
2. If your VVDI is not from us, but you also want to update yours. You need pay *0USD for each update 
 
Support Car List:

1 AN**2 - KM-CAN

1 AN**3 - PIN-CAN

1 AN**4 - IMMO panel

1 AN**5 - IMMO panel EDC*6

1 AN**6 - KM/PIN K-Line

1 AN**8 - Flash Counters
1 AN**9 - Key learning
1 AN**0 - Airbag EEPROM
1 AN**1 - TV Activation
1 AN**2A- EDC*6 Odometer
1 AN**2B- EDC*6 EEP/PIN/IMMO-off
1 AN**4 - EDC*7 EEPROM
1 AN**5 - Flash Memory ECU
1 AN**6 - Dealer key learning
1 AN**8 - Dealer key learning Q7
 1 AN**9 - Prepare Dealer Key Q7
1 AN**1 - ME7 EEPROM by CAN
 1 AN**2 - CDC*2xx Programmer 
 1 AN**7 - Q7 ***8

IMMOPLUS V*9.0 Update Information:

1.Immo4 system add ***3 TFT color display support(***3 passat, ***3 tiguan): change KM, add key even lost all key.

2.Immo4 system add ***3 bora JCI support: change KM, add key

3.Immo4 system update ***3 NEC**4C*4(support ***3 scirocco): support lost all key

4.Immo4 system support A6/Q7 OEM key, need special OEM key chipset

5.Fix bug for some MED*7/EDC*7 ECU read PIN, CS, MAC with OBDII.

6.For immo4 system, you can prepare dealer key without TP chipset, it will generate TP with user choose manufacture

7.You can change *8 chip ID in KEY CHIPSET function, need special *8 chip and immo5 coil

8.Add more car auto detect.

9.This version need newest firmware support

*0.bugfix

IMMOPLUS V*8.0 Update Information:

1.Enable to read Pin, CS and MAC for MED*7/EDC*7 by OBD in extra function list, or just through eeprom and flash

2.Enable to generate ignition key through OBD without having to remove dashboards for some vehicles with NEC*4C*2 or NEC*4C*4 type dashboards. The radio can be found on key all lost menu

3.Generate the 4th immo key with ID *8 transponder chip according to the hints. Rewritable ID *8 transponder chip, as well as updated the 5th Immo adapter, is needed to support this function

4.Generate A4L/Q5 OEM key (according to the hints), unlock OEM key on key chip menu by using exclusive OEM key and the 5th Immo adapter.

5.Support automatic identification of more car models

6. Firmware update is required to run the new version of IMMOPLUS

7. Bug Fix

VVDI Immoplus V*6.0 Upgrade Instructions:

1. IMMOPlus V*6.0 can upgrade antenna, after upgrade, it will be more accurate in identifying the electronic chip *8, when the software run, please connect well the antenna coil, the un-upgraded antenna won't be used on 8.6.

2. Add more car models' automatical identification, fix the bug that a part of CDC*2XX can't be diagnosed.

3. IMMOPlus V*6.0 can't run only after the newest hardware is upgraded.

4. Bug fix.

VVDI Immoplus V*5.0 Upgrade Instructions:

 1.Add "reading out CS, PIN, MAC from Engine" in the additional function menu. Search the 7th byte security code from the working key then generate the dealer key according to the code, to support this function it needs the 5th IMMO Update Tool

 2. Work with more car models with NEC*****0 JCI

 3. Support more models of automatic identification 

 4. To run this software version it requires updating the newest firmware

 5. Bug fix

 China VAG Vehicle Diagnostic Interface VVDI Function Added:

1. Support NEC *4C*2, NEC *4C*4 change mileage through obd2, generate dealer's keys, read and write EEPROM and backup flash data.
2. Support GOLF5 MM7(9S*2) change mileage through obd2, generate dealer's keys, read and write EEPROM and backup flash data.
3. Add TA special chip pre-program. Directly pre-program ID*8 to TA2,TA3, TA4, TA5 chips.

Function:

1) Extracting security access codes (PIN) by OBDII
2) Programming keys by OBDII. Preparation of dealer's keys.
3) Mileage recalibration by OBDII
4) Clearing crash data DTCs by OBDII
5) Read/Program flash memory of engine control units by OBDII. Options for resetting the number of flashing attempts.
6) Exchange speed limit of MMI-TV system

Standard Diagnostic Functions:

1) Connect to the device using KWP***0 over TP2.0, KWP***0 over TP1.6, UDS over ISO transport protocol (CAN), KWP***1 or KWP***0 over K-Line
2) For all electronic control units reading identification data
3) For all electronic control units read error (DTCs)
4) For all electronic control units clear error (DTCs)
5) Scan all units
6) Broadcast requests
7) Measured values
8) Adaptation

Special Functions:

1 Instrument CAN
(1) With this function you can establish diagnostic session with the Instrument cluster using KWP***0 over TP2.0
(2) You can read current odometer value
(3) You can change odometer value
(4) Added support for VDO Instrume