Product Description

Product Description
Reverse osmosis referred RO, the principle is the raw water under high pressure through a reverse 
osmosis membrane, solvent water from high concentration to low concentration diffusion to achieve 
the separation, purification and enrichment purposes. Reverse osmosis can remove bacteria, 
viruses, colloids, organics and more than *8% of the soluble salts. This method has low running 
costs, simple operation, high degree of automation, water quality and stability characteristics 
Widely used in water pure water, drinking water pipelines living area, a number of food and 
beverage industry, textile, chemical and pharmaceutical, electronics and electricity.
 

 Functions
 

1. Automatic operation with optional manual control and following functions:
2. automatic control valve;
3. automatic membrane flushing and rinsing;
4. flushing tank; low/high water level and pressure protection and shutdown functions;
5. circuit breakers and earth fault to prevent electric damages.

RO equipment before buying Let us first understand what we need to configure the following: 
 

What we need to configure the following:

1.Water usage? The daily amount of water (how many T / H?)

2.Raw water situation? (Tap water, well water or groundwater? How about water? (Conductivity is how much) Are the raw water quality can be stabilized?)

3.Required water quality? How much conductivity or resistivity rate? Or to provide water for use in any place, for what?

4.Pretreatment with automatic part? Manually? (Backwash and resin regeneration is controlled automatically or manually controlled, automatic control costs higher prices).  

5.Filter material? Mainly refers to (pretreatment portion) of the tank material, steel fiber glass, or stainless steel, or A3?

6.Booster is domestic or imported?

7.Are *4 hours with water, there is no short period of time requires a lot of water situation? Water supply equipment water production design or need a little bigger? (Pre-treatment time required backwash routine maintenance, there is a need to soften the regeneration time, when the host does not produce these water)

8.Electrical control part is an ordinary relay control? Or system-wide PLC program control?  

9.Are there water storage facilities? Are the original tank need quotes? The water Are needed to produce pure water tank? Pure water tank if you want to offer?

*0.Equipment placement site? (Indoor or outdoor space is adequate)

*1.Quotes Are tax? (3%, *7% of the two)

*2.Ion exchange (1) Are there are special requirements for the resin brand? (United States and Haas, Purolite UK, Bayer or domestic, etc.)  

*3.RO membrane brand of choice? Dow, the U.S. or China Huitong Hyde