Product Description

Following is a description about our cabinets. 1. cabinet frame, door frame, drawer head are made of 3/4" solid wood. 2. Drawer box is made of 5/8" solid wood, dovetail and tenon joint. Bottom of drawer box is 1/4" double sides wood veneer plywood. 3. Cabinet box is made of 1/2" double sides wood veneer plywood. Interior of box is clean finish (transparent painting), exterior is without finish. If it is a default option to put a matching stain inside if it is a open shelf cabinet or glass door cabinet. 4. 3/4" hanging rails for base and wall cabinets, 1/4" double side veneer back board. 5. 3/4" adjustable shelves, front side banded with wood veneer. 6. side mounted 1/2" toe kich. 7. traditional overlay or full overlay for select. 8. default drawer slide : r under mounted soft close drawer slide 9. default hinge: six way adjustable. *0. plastic locking clips to fix adjustable shelves for base and wall cabinets. *1. Ever soft bumpers stick to the back of door to make a silent closing. Hydraulic/Compressed Air Buffer is advanced device for option select. *2. Moisture of wood is kept below *2% degree. *3. Glazing finish is available. *4. Flat packing: For example B*4, will be divided into parts ( frame, door, drawer head, end xxxxx), every part will covered with foam paper to resist impact and scratch, and place layer by layer, finally put in cartons, desiccant will be a default select included inside. *5. For all the parts, they are ready to assemble, hinge hole pre-bored, screw holes pre-drilled, slide position pre-drilled. Using your screws and air staple to assemble cabinets is a easy job. *6. Different moldings, accessories, decorative corbel, onlays for your opinion.