Product Description

Product Name: **0W mining lamp / factory lamp
Material: Aluminum
Power: **0W
Light source: High power integrated LED
Chip: high-brightness genuine Taiwan wafer chip or American Bridgelux chip (3**0W)
Luminous flux: *5,**0Lm
Voltage: AC**0V***0V
Driver: Built-in constant current driver
Power factor: ≥0.*0
Energy efficiency: more than *0%
Color temperature: optional between 2,**0K and 6,**0K
Color rendering index: ≥*5
Beam angle: **0°
Installation height: **7m
Service life: *0,**0 hours or above
Installation type: lifting
Electrical Type: Class I
Repair instructions:
1. Make sure that the power is off before servicing.
2. Regular cleaning the shell of mining lamp and dust on heat radiator to keep good light transmission.
3. Regular cleaning the housing of mining lamp and radiator dust, in order to maintain good heat dispersion.
4. Be careful not to use water or corrosive solution for cleaning, preferably with a dry cloth.
5. While replace the power supply, you can directly open the back cover with a screwdriver, remove the power supply, and connect the tri-core wire of AC power according to the following order: connecting the red wire to L, blue wire to N, yellow green or yellow to , red wire or white wire of DC power line to black wire of the power; positive and negative electrode should not be inversely connected.