Size:

**5mm x *8mm x *8mm

GPS:

Storage Temp: **0 to *5°C

Operating Temp: **0 to *5°C

U-BLOX G****-ST, *0 channel

Antenna: Internal

Frequency: L1 ***5.*2 MHz

Position Accuracy: <5m

Sensitivity:

Tracking:–**1 dBm

Cold starts:–**8 dBm

Hot starts:–**6 dBm

Cold start: <*7s

Warm Start: <5s

Hot Start: 1s

A-GPS:

AssistNow Online and AssistNow Offline services,

OMA SUPL compliant

GPRS:

Rechargeable,***0mAh,Lithium-Ion Battery,

Built-in Vibration/motion sensor

APN Setting

*apn*AXXX*BXXX*CXXX*

This command sets the telecom Access Point Name. BXXX refers to user name, CXXX refers to password.

Master Setting

*master******6**1XXXXXXXXXXXX*

*1 refers to the country code. XXXXXXXXXXXX is the cellphone number. Please make sure country code is included, and 0 is not needed before cell phone number

Password Changing

*password******1*

Original password is default as *****6. *****1 refers to new password.

Vibration Sensitivity Setting

*sensitive***5*

1 being the most sensitive, 5 the least. Default setting is 1.

Alert Setting

*callalert*

Call alert will call master number 2 times when motion is detected after 3 minutes non-movement.

*smsalert*

SMS notification will sent to master number when motion is detected after 2 minutes non-movement.

*alertoff*

End Call/SMS alert

LLC Query

*locate*

Latest information of latitude, longitude, date, time and ranking.

Address Query

*locateaddress*

Address information of current location.

Google Map Search

*locatemap*

Google Map link with current location.

Routetrack Setting

*routetrack****9*

***8 represents hours of accumulated data, *9 means always on.

Routetrack Sampling

*rsampling*****9*

****9 represents seconds of data collecting interval, default as *0 seconds.

Routrack Upload

*rupload******9*

*****9 represents seconds of data uploading interval, default as *0 seconds, minimum rate should not be less than *0.

Routetrack Off

*routetrackoff*

End routetrack function.

Check Function Setting

*check****9*

***9 represents hours of data upload interval, default as *check*0*

*checkm*****9*

****9 represents minutes of data upload interval

*checkoff* / *check*0*

End check function

GeoFence Setting

*fence****9*

***9 represents ****9km radius“bubble”around the device.

*fenceoff*

End Geofence function

Status query

*status*

Check system status

Multi Controller

*multiquery*

Enable multi controller function

*multiqueryoff*

End multi controller function

Device Information

*about*

Software edition information and device’s serial number.