Product Description

Vacuum pump

SPB water jet vacuum pump



SPB water jet vacuum pump

SPB water jet vacuum pump product instruction 

SPB water jet vacuum pump is a pump with a vacuum, condensation,drainage and other two kinds of mechanical device effective. It is the use of certain pressure water through the spray nozzle inclination.Polymerization in a focal point, because the jet flow speed is higher,they form a negative pressure around the room so have a vacuum device, in addition to the two steam jet flow with the direct contact,heat exchange, the vast majority of steam condenses into water, a small amount of uncondensed steam and no condensation gasmutual friction and high speed jet the flow, mixing and extrusion, thediffuser is excluded, the formation of higher vacuum for indoor.

SPB water jet vacuum pump scope

SPB water jet vacuum pump is widely applied, mainly used in vacuum and evaporation system. Vacuum pump. Vacuum evaporation,vacuum filter, vacuum crystallization, drying, deodorizing process, is sugar, pharmaceutical, chemical, food, fermentation and some light industry, the Department of defense needs a wide range ofequipment.

SPB water jet vacuum product application

Glass fiber reinforced plastic injector equipped with centrifugal pump can be corresponding vacuum pump, injector without high groundinstallation, can be installed. The injector has the advantages of convenient installation without repair. FRP injector has antisepticinjector characteristics also has molded density inside and outside surface is smooth, strong corrosion resistance and durability. Thehigher, can be compared with stainless steel beauty etc..

SPB water jet vacuum model significance

For example, SPB50-120 water jet vacuum pump

S——waterpower

P——jet

B——pump

50——inlet diametermm

120——inspiratory capacity（m3/h）

SPB water jet vacuum installation and notice

1. From the pump to the water water jet vacuum pump into the pipeline,should minimize the length of pipe and elbow, the resistance loss.

2.The drainage tube for vertical without elbow.

3.The interface requirements strictly, avoid leakage.

4. When installing the user according to the diffuser outlet pipediameter door with a tail pipe length should be in 1 meters of above,but not into the shallow pool on the eyelids ring.

5. Fault: vacuum degree is not up to the reason: according to thepipeline leakage, nozzle clogging pump flow, pressure, vacuum table.

SPB water jet vacuum main parameter

Including the complete set of this series pump: jet pump, circulating water pump, a circulating water tank, an electromagnetic filtratecylinder etc..

Type the maximum extraction of ultimate vacuum suction mouth diameter of MM quality kg m3/h L/S MPa mmHg models equipped with water pump.

SPB100 72 20 -0.095 -720 50 55 IS65-50-160

SPB200 162 45 -0.095 -720 80 120 IS80-65-160

SPB350 342 95 -0.095 -720 100 275 IS100-80-160

SPB450 706 196 -0.095 -720 125 490 IS150-125-315A

SPB600 1296 360 -0.095 -720 200 850 8Sh-13A

SPB750 2520 700 -0.095 -720 300 1290 12Sh-13A