Product Description

Introduction on main performance features of XSZ**0
deep well drilling rig
  
 
1. It is equipped with CNHTC 8X8 all-wheel-drive automotive chassis,meeting the national IV emission standards and equipped with off-road radial tire of transverse pattern with strong off-road performance.

2. The full hydraulic rotary plate can achieve stepless speedvariation, and the torque of the rotary plate can adjust automaticallyto adapt the construction of different strata. And the height of the rotaryplate can be adjusted up and down, which makes the operation safe and
convenient;

3. The working devices all adopt hydraulic-driven, and the hydraulic main oil-way adopts load sensitive control, energy efficient. All actions
can be centralized operated to reduce the labor costs;

4. Power head system adopts two separate Cummins 6BTAA5.*-C**0engines, one engine drives the hydraulic pump, another engine driveing mud pump through a belt and clutch, the power is matched reasonablly , energy saving and enviromental friendly using.

5. Equipped with BW***0/*2 mud pump, with the maximum displacementof ***0L/min and the maximum pressure of *2Mpa. The output pressure andflow of the mud can be freely switched via the shifting mechanism. Thecustomers can conduct air drilling or foam drilling by adapting aircompressor and foam pump.

6. The main winch is driven by automatic variable hydraulic motor, and the hoist capacity and speed can be adjusted automatically. Designthe reel as helix line structure, and equipped with a pressure rope deviceto ensure that the steel wire rope can arrange on the roll neatly andorderly, which can prolong the service life of the steel wire rope
effectively;

7. The drill tower is the whole truss structure, with the effectiveheight of *4,**0mm, and it meets the operating requirements of ***0m
actuating drill rod and 9,**0mm round drill rod;

8. It is designed with compression and decompression systems of dualhydraulic cylinders-steel wire rope of super-driving feed mode, and itsmaximum hoist capacity is **0kN, and it can be imposed pressure in the early stage of open drilling, with the maximum compression of **0kN.