SPECIFICATION OF GENSET MODEL YMG*4SL

 

HUUTOAN  genset model YMG*4SL, poweredby Yanmar diesel engine (Japan) driving a Mecc Altealternator(Italy).

 

 

+ The engine and alternator are coupled directly with each other and mounted on a base frame.
+ Gen-set is designed for intermittent overload capacity of *0% for one hour in any twelve hours of running at

prime rating. Standby power ratings are applicable for supplying electric power in event of normal utility

power failure. No overload capacity is available for the standby ratings.
+ Type: Bushless, self excited with AVR,single bearing, direct coupled.

+ Construction: Single bearing,self lubricated, self ventilated.

+ Voltage regulation: The voltage accuracy is +/*1% in static condition with any power actor and speed 

variation between *5% - **0% with reference to the rate speed.

+ Mechanical structure: The materials used for the manufacture of the mechanical structure are the

following: FeP*2 steel for the frame, C*5 steel for the shaft and cast iron for the end-brackets.

+ Overload: The permissible overloads are of **0% for *0 seconds, of *0%for 2 minutes and of *0% for 1  

hour every 6 hours of operation.

+ Insulation and impregnation: Insulation is of class H standard. Impregnation is made with tropicalized

epoxy resins by dipping and dripping, whilst for the high voltage parts by vacuum, so that the insulation level

is always very good.

+ Regulation: The self-regulation is obtained through an electronic regulator. The regulator is fed by an

auxiliary winding which guarantees an almost constant supply any possible operating condition of the

generator. The alternator is equipped with S.R7 regulator, ensuring its performance.

 

CONTROL PANEL SPECIFICATION  

 

Control panel is completed with Auto Start Control panel.

 

Indications
- AC Voltage	- Frequency	- Water Temperature	- Operating Hour
- DC Voltage	- Revolutions	- Power Factor	- Fuel Level (Soundproof type)
- Ampere	- Oil pressure	- Power

 

Shutdown with indicators
- High Water Temperature	- Over Voltage
- Low Oil Pressure	- Under Voltage
- Over Frequency	- Over Load
- Under Frequency	- Short Circuit

 

Features
- Automatic start	- Remote monitoring
- Automatic mains (utility) failure	- Engine history event log
- Automatic load transfer	- LED alarm indication
- Engine protection	- LCD alarm indication
- SMS messaging

 

The controlpanel provides advance metering facilities, displaying the information on the LCD display. The

information can be accessed using the display scroll pushs located next to the LCD display.