You are not registered with TradeKey.com. Please click here to register.
3,712,092  Registered Users
 
 Home > Products > Inertia 5066 Hawk Primary Crusher
Contact Now
Send Email
Member Since Apr 2008
Rate this company
Print this page
Report Fraud/Spam
Recommended Trading Tips
 

Inertia Machine Corporation

    
Inertia 5066 Hawk Primary Crusher

Inertia 5066 Hawk Primary Crusher


[5066] [USA]
Posted Date: April 16, 2008
Free Member  |  Rate this company
   
Description
5066 Hawk

600 tph virgin aggregate
300 tph recycled concrete

Large tonnage processing


CHASSIS
The chassis is constructed with W21 x 62 pound I-beam main frame rails. It has a heavy duty impactor mount with both weld in and bolt on wear liners. The chassis also has an integrated grizzly bypass chute to allow finer material to fall through the grizzly section of the feeder and on to the discharge belt. Two 24” stroke hydraulic legs with 12volt pump are used to raise and level the plant for operation. The plant comes equipped with king pin and a heavy duty triple axle suspension with 11 x 22.5 tires, air brakes, lights, and mud flaps.

FEEDER
The feeder is an Inertia 60” x 18’ vibrating grizzly consisting of heavy channel and plate construction. It has ½” weld in floor and side liners and a 4’ long grizzly bar section with 5” nominal spacing. The feeder uses two Invicta BL 60-90 vibrating motors along with a slight decline in angle to feed the impactor.

HOPPER
The hopper is removable and is 9’ wide x 19’ long, 14 cubic yards non-heaping. It is constructed of 5/8” plate and has a heavy-duty bolt on chain curtain to prevent material blow back from impactor.

IMPACTOR
The impactor is an Inertia 5066 HSI (50” diameter x 65” wide) single rotor impact crusher with sectionalized frame construction of both welded and bolted heavy plate steel. It has replaceable frame liners of HARDOX-400 material with a wear resistant steel rotor and cast replaceable blow bars. The impactor has two adjustable breaker plates lined with HARDOX-400 material to control product graduation and a spring relief system for non-crushable material. It incorporates self-aligning spherical roller bearings and 4 bolt, split pillow blocks which are protected from dust contamination via a non-rupturable labyrinth seal. It has four access doors for internal observation, inspection, maintenance, and repair, and two hydraulic cylinders for opening the impactor hood.

REAR DISCHARGE CONVEYOR
The rear discharge conveyor is 42” x 38’ under crusher mounted. It has 4’ impact slide bed and CEMA “B” five inch idlers. The tail pulley is a 12” wing pulley with 2 15/16” pillow block bearings bolted to 18” telescoping take-ups. The head pulley is a 16” crowned drum pulley with vulcanized rubber lagging and 2 15/16” pillow block bearings. The conveyor is belt driven by a 15hp electric motor and 415 reducer combination. The conveyor belt is a heavy-duty rip stop belt with a flexco belt splice.

POWER/DRIVE
The plant is powered by a 400hp Diesel engine that belt drives the impactor and 125kw 480V-113 amp generator with 8V belts. The generator supplies power to an on-board electrical switch gear with 100 amp disconnect and circuit breakers. The circuit breakers are used to supply power to the (2) Invicta vibrating motors on the feeder and the conveyor motor, with and additional circuit breaker to supply power to an off-board piece of equipment. The belt drive has a fully enclosed guard with two service doors.
 
 
Other Information
Location:  USA 
Minimum Order:   
Price for Minimum Order:   
  (This price is only for minimum order, for large quantities, please contact)
Sample Available:  No 
Related Categories: Gravel/Aggregate & Sand
Related Products: aggregate, primary »
This company is registered as a free member and is not verified or authenticated by TradeKey.com. Click here to know more about Goldkey and Silverkey membership.
Contact Information
Please Sign In to view this member's contact information. Sign In
Not a TradeKey.com member yet? Join Now. Its Free!
   
This is not what I'm looking for.  

More Related Keywords: ice crusher
Gravel/Aggregate & Sand: oil sands, titanium dioxide, rose quartz crystals, rocks minerals, aquarium gravel, quartz rocks, pea gravel, limestone rock, agricultural gypsum, landscaping gravel, landscape gravel, silica sand
 
Premium Suppliers
E-Max Construction Materials CO., LTD [China]
Micro silica is one of the principal products supplied by E-Max Materials. It finds a wide range of applications in high-strength concrete, other building materials such as roof tiles and facade cladd...
Gansu Lixinyuan Microsilica Co., Ltd. [China]
Gansu Lixinyuan Microsilica Co., LTD., was established in 2003 which specialized in manufacturing and exporting Microsilica products. Lixinyuan built up its own production and processing factory i...
Shanghai DongMeng Road & Bridge Machinery Co., Ltd [China]
Shanghai DongMeng Road & Bridge Machinery Co., Ltd. is a professional manufacturer of a complete set of stone crushing and screening machines, including Hopper, Vibrating Feeder, PE Jaw crusher, P...