based, ready to use decorative plaster containing natural colour
NATURIN NATURAL is
used in exterior faces of all kinds of buildings on rough plaster,
exposed concrete, cement sheet and insulation systems as final coat
material, along with suitable undercoat.
Manufactured in two different sizes; 1
mm and 3mm.
Vapour permeable, enables the vapour to
be thrown out and lets the surface breathe.
Covers up the faults on the surface
with the thick layer of film that forms during
Not affected from external factors, and
weather conditions like rain, snow, humidity, extreme hot or cold
and its colours do not fade.
Resistant to UV and
harmless to human health and environment
Clean all dirt, oil,
blistered paint and dust off the application surface; level the
surface defects with FIRACOLOR ACRYLIC PUTTY.
surfaces, or surfaces that will be painted must be undercoated with
NATURAL mineral plaster well until it achieves a homogenous
NATURIN NATURAL mineral plaster on the entire surface with equal
thickness with steel spud.
NATURIN NATURAL mineral plaster with steel spud 20 minutes after it
is spread on the surface under normal weather
spud used for finishing with water from time to time.
The environment of application must be
kept above +5 ˚ C within 24 hours during and after the
TIME:The contact time is 4-6
hours, and thorough-dry time is 24 hours in environment of
CONSUMPTION: Depending on surface smoothness and application
methods, for single coat application:
mm = 2.2 -2.5
mm = 3 -3.8 kg/m²
Store in enclosed
packaging for 1 year between +5oC to +30oC
away from places where children can reach. Avoid
eye and skin contact.