I. Technical Data
Model     Sheet Thickness（mm）     Coil Width(mm)     No.of Slitting     公差(mm)     Line speed
(m/min)     Coil Weight(t)
KJS***8****0     **8     *******0     ***6     ±0.1     ***0     *5、*0、*5
KJS***8****0     **8     *******0     ***6     ±0.1     ***0     *5、*0、*5
KJS***8****0     **8     *******0     ***6     ±0.1     ***0     *5、*0、*5
KJS****0****0     ***0     *******0     ***6     ±0.1     ***0     *5、*0、*5
KJS****0****0     ***0     *******0     ***6     ±0.1     ***0     *5、*0、*5
KJS****0****0     ***0     *******0     ***6     ±0.1     ***0     *5、*0、*5
KJS****2****0     ***2     *******0     ***5     ±0.1     ***0     *5、*0、*5
KJS****2****0     ***2     *******0     ***5     ±0.1     ***0     *5、*0、*5
KJS****2****0     ***2     *******0     ***5     ±0.1     ***0     *5、*0、*5
KJS****2****0     ***2     *******0     ***5     ±0.1     ***0     *5、*0、*5
KJS****4****0     ***4     *******0     ***5     ±0.1     ***0     *0、*5、*0
KJS****4****0     ***4     *******0     ***5     ±0.1     ***0     *0、*5、*0
KJS****4****0     ***4     *******0     ***5     ±0.1     ***0     *0、*5、*0
KJS****4****0     ***4     *******0     ***5     ±0.1     ***0     *0、*5、*0
KJS****6****0     ***6     *******0     ***4     ±0.1     ***0     *0、*5、*0
KJS****6****0     ***6     *******0     ***4     ±0.1     ***0     *0、*5、*0
KJS****6****0     ***6     *******0     ***4     ±0.1     ***0     *0、*5、*0
KJS****6****0     ***6     *******0     ***4     ±0.1     ***0     *0、*5、*0

II. Introduction of the slititng line
Slitting line machine not only for the steel serivice cutting industry, but also for the pipe industry. A lot of customers make the pipes before slitting the large coil to the small size of coils.

Slitting line can do uncoiling, slitting and recoiling works, make coil steel to any needed width coil steel. It mainly includes coil car, uncoiler, coil guide, slitting machine, scrap winder, tension unit, recoiler and coil car, hydraulic system, Etc. It mainly used in coil or hot rolling carbon steel, silicon steel and all the other kinds of metal materials with surface spreading.
This line can be adjusted to do recoiling or dividing work to meet customer’s demand.
 
III. Machine parts in the working line
1. coil car
2. decoiler
3. peeler entry table
4. Straightener.
5. Shearing machine
6. loop table
7. coil guide and pinch roll
8. Slitting machine
9. scrap winder (both sides)
*0. Loop table
*1. separator and tension table
*2. Deflector roll and exit threading table
*3. Recoiler
*4. Over arm separator in the recoiler.
*5. Exit coil car for recoiler
*6. Hydraulic system
*7. pneumatic system
*8. electrical control system