Get Verified Buyers & Suppliers
Avail Free Consultation
Buy Wholesale Automatic Transfer Switch in Learned From Reputable Suppliers
Automatic Transfer Switch
An Automatic Transfer Switch (ATS) is often installed where a backup generator is located, so that the generator may provide temporary electrical power if the utility source fails.
Socomec ATyS M Range Automatic Transfer Switch
ATyS t M are modular automatic transfer switches with positive break indication. They are 4 pole (three-phase) devices. They have all the functions of the ATyS d M together with an integrated ...
NA Type Automatic Transfer Switch/Two Sections Of Integral Type
Dual-power Automatic Transfer Switch is divided into two parts, namely Special ATSE and Derived ATSE.The former could connect and bear load, but can't break short circuit current.Derived AT...
Dual Power Automatic Transfer Switch Ats
Automatic transfer switch 1.Application: The automatic transfer switch (ATS)is used for the state of a load, widely used in the fire, postal communication, hospital, hotel where need elect...
Rdq3nx Series Dual Power Automatic Transfer Switch (ATS)
Rdq3nx Series Dual Power Automatic Transfer Switch(ATS) RDQ3NX-A/B/C/D Series Summary The new designed RDQ3NX-A/B/C/D series Auto transfer switch is based on deep development...
Automatic Transfer Switch With Controller-T Series
Controller Of Automatic Transfer Switch LLK-801B ATS Intelligent Controller(with generator start signal ) Feature:adopt LG chip, can control PC class and CB class ATS, appliable for all kind...
WST-5 Dual-Power Supply Automatic Transfer Switch Controller
Products Information Installation Dimensions : 150mm x 121mm Time Adjustable Delay Function Open Phase Protection Automatic Generator Startup Two Steady Operating Positions and Three Steady Operati...
Automatic Transfer Switch
power switch; ATS Model: YES1-125N Features: 1) Rated current of over current release: 40A, 63A, 80A, 100A, 125A 2) Pole number: 2p, 3p, 4p 3) Rated working voltage: AC 400V, 50Hz 4) The total height is only 110mm 5) Good function connection:UTILITY - UTILITY Features: 1) Provided with such protective functions as checking two sources of voltage at the same time, protection when any one phase or one phase above experiences under- or over-voltage, guide phase 2) When two sources have abnormal or faulty tripping (overload, short circuit), the controller won't send out the order to realize the protective function of reopening and closing 3) Four working modes: automatic control, common source (power supply I), standby power supply (power supply II), breaking electricity (re-tripping) 4) When the working mode is in the automatic control state, it has two self-throw no self-recover, self-throw, and self-recover functions: a) S...
Automatic Transfer Switch ATS PC Type 5000A
CAQ2 series dual power automatic transfer switch is one of adopted international ATSE technology developed by our company. It is suitable for power supply system with rated insulating voltage is AC800V, rated working voltage is AC690V, and below DC250V, and AC 50Hz/60Hz, rated working current is 20A-5000A of two-path. The transfer switch and the matching intellect display, they are main used for high building, the post and communication, coal mining, shipping, military facilities industrial assembly line etc the situation of need the interruption power supply. Under the city rapid increase power supply necessary trend, they can satisfy the higher requires of reliable power supply, the products have reliable performance, small size and easy operation etc features.
Dual Power Automatic Transfer Switch
（1） XT series automatic transfer switch is developed by our company one base of adopting international advanced ATS technology. （2） Withstand 10le current and above, contacts part with high pressure are difficultly detached and weld. It is special important for fire system. （3） Clearance between open contacts: clearance and creepage distance of PC’s ATS is 180% of breaker’s. （4） Transfer faster: apply of quickly making breaking technique, the on-off action of contact part is unrelated to operation .It can reduce influence between arc and contact and then improve ATS life expectancy the effectiveness of technique is more apparently developed when the load is motors or transformer. Transfer time is within 200ms, only 1/10 of CB’s. （5） Long contact expectancy: mechanical 50000 times, electrical 10000 times. （6） AC&DC: adopt for rectifier current to control electrical power. （7） Excellent anti-arc capability: multi-pieces anti-arc contact, quickly shut off at the first time, and t...
SGLD Automatic Transfer Switch
SGLD series automatic changeover switch mainly suitable for distribution or electromotor network, which under AC 50Hz, rated voltage 380V, rated voltage DC 220V, rated current 16~1600A, main power and standby power or mutual standby power changeover system or city power and generator group overload switch-over system or city power and generator group over load switch-over. At the same time, it can operated under un-frequency On and Off circuit act as disconnector. Such products are widely used at the field of Important Power supply site, which transport, distribution power supply system and automatization, system for Fire Proection, Hospital, Bank, Building etc., which doesn't allowed power off. Specification: from 160A to 3200A for 3P and 4P Mode of operation Direct operation: handle is installed on the switch Operation outside the board: handle is installed outside the door of power distributing board A bridge can provided to connect the inlet or outlet terminal of...
Automatic Transfer Switch(ATS)
ATS is a kind of automatic or remote automatic switches, which can insure the swift and isolation of double power or load. The main products double power automatic switch and its accessory intelligent displayer are widely used in high building, telecommunication, mine, shipping, military facilities, industry lines, railways, highways and airports etc. It can better satisfy the reliability since with rapid increase of electricity in cities. Features They can be divided into 2 series. PC series isolation type ATS and CB series intelligent type ATS. Standard compliance ***** Standard: IEC60947-1(1998)Low Switch Voltage Equipment and Control Equipment, part one :General Rules. IEC60947-3(1999)Low Switch Voltage Equipment and Control Equipment, Switch, Isolator, Isolation switch, and Combined Electric Equipment of Fuses. IEC60947-6(1999)Low Voltage Switch Equipment and Control Equipment Multi-Function-Switch Automatic Transfer Switch Electrical Device> ***** Standard: GB/T ...
HATS Dual Power Automatic Transfer Switch
HATS series automatic transfer switch is one new ATS of our company developed by themicrocomputer control technology . This series ATS is settled AM2 circuit breaker as the execu-tive element, and along with the mechanotrons, the new control mechanism with electrome-chanical double interlock, which is especially applied in the important places not allowed poweroff. To meet actual demand, three different operation methods are available such as automaticentry automatic reset, automatic entry non automatic reset and commutative standby. The device conforms to xxxxx whole series have past CCC certification.
Automatic Transfer Switch (ATS) 125A
Automatic Transfer Switches (ATS) YES1-125NA Features: 1) Rated current of over current release: 40A, 63A, 80A, 100A, 125A 2) Pole number: 2p, 3p, 4p 3) Rated working voltage: AC 400V, 50Hz
Dual Power Automatic Transfer Switch (MQ3)
MQ3 series dual power automatic transfer switches (follow brief as setting) is one of adopted international technology developed by our company. The setting is suits for AC 50Hz, rated working voltage is 400V, rated current 6A-100A and under dual power supply system. It has over voltage, under voltage, lost phase�s protection function. The setting mainly used for hospital, shopping center, bank, and chemical industry, metallurgy, high building, military facilities.
Standards
IEC947-6-1(1989) <