Product Description

Feature：
* ***0 single color
* Size：***0**0mm
* Beam Angle：**0 °
* LED：**0 LED/roll（*0 LED/M）
*  NON waterproof IP*0
* 3M tape in the back
* Working Voltage：DC*4V
* Working Current : *0 mA/ Group
* Power：7.2 W/M
* Brightness：****2lm/led
* CE Certificated
Application
*Cove lighting
*Architectural lights for canopy, corridor, window, archway
Backlight or edge lighting for signage
* DIY lights for home use
* Path and contour marking
* Decorative lights for holiday, event, show, exhibition
* Special light effect for art gallery and glass-made items

 Safety Information 
* The strip itself and all its components may not be mechanically stressed.
* Assembly must not damage or destroy conducting paths on the circuit board.
* Installation of LED ribbon (with power supplies) needs to be made with regard to all applicable
   electrical and safety standards. Only qualified personnel should be allowed to perform installations.
* Correct electrical polarity needs to be observed. Wrong polarity may destroy the strip.
* Parallel connection is highly recommended as safe electrical operation mode.
* Serial connection is not recommended. Unbalanced voltage drop can cause hazardous overload and
   damage the strip.
* Please ensure that the power supply is of adapters power to operate the total load.
* When mounting on metallic or otherwise conductive surfaces, there needs to be an electrical isolation
   points between strip and the mounting surface.
* Pay attention to standard ESD precautions when installing the strip.
* Damaged by corrosion will not be honored as a materials defect claim. It is the user’s responsibility to
   provide suitable protection against corrosive agents such as moisture and condensation and other harmful elements.