Product Description

Application:�

The pump is mainly used to deal with the convey of gas-bearing materials. So it is widely used in the occasions that the liquid level is unstable, and the liquid level is lower than that of inlet to draw the material, and also used as return in the CIP system. And it is the necessary convey equipment in the food, chemical, pharmacy. Field.�

Functions and specifications:�

The design adopt the side channel principle leading to the excellent suction, sanitariality, low power, lower noise, easy to clean, and low cost to maintanance.�

Shaft sealing:�
YUY sanitary priming pump seal is mechanical seal, include the stationary ring SUS**6L steel embedded in grapgite structure, and the movable ring made of silicon carbide.�

Material�

All the part contact with medium, pump case. Pump cover and impeller are made of AISI**6L stainless Steel.�
The part contact with medium: AISI**6L stainless steel�
Other parts: AISI**4 stainless steel�
The sealing contact with medium: EPDM�

The part contact with medium is polished, and other part is glass painted or sand Blasted treatment.�

Datasheet :�
Max Inlet Pressure: � � � � � � � 0.5Mpa�
Temperature Range:����������� **0� C to ***0� C(EPDM)�

Flushed mechanical seal:�
Water pressure:������������������� Max0.1MPa�
Water consumption:������������ 0.***0.5L/min�

Motor�

I) According to the configuration, we adapt three phase. The motor desigedaccording to the International Eltronical Commission IEC ****4. IEC****2, and comply with the�EC requirements of "CE"marking requirement.�

II). The explosion-proof motor also available, that can meet with the requirement of different�Applications.�

III) It with excellent electric performance, and with low niose, low vibration, the protection grade is�IP*5, insulation grade is F.�

IV) The operate involtage�
3Kw, ******0V/******0V,�? /Y�
V)Frequency�
*0Hz/*0Hz�

VI) Operate way: Continously�

VII) Running Speed: ***0r/min