Looks like you are not TradeKey.com's Member yet. Signup now to connect with over 9 Million Importers & Exporters globally.
Join Now, its Free |
Book call on your favorite time

By Signing Up. I agree to TradeKey.com Terms of Use, Privacy Policy, IPR and receive emails related to our services

50E-3 Advanced Optical Transparent Coating



( Negotiable ) Get Latest Price



16 Ton

20L iron pail or 200L iron pail

20 to 30 days before T/T

16 Ton per Month



Contact Now

Product Specification

Classification : Double Components Adhesives Main Raw Material : Acrylic Brand Name : Xiang yang JingXinHuiMing CAS No. : - Other Names : - MF : - EINECS No. : - Usage : -

Product Description

50E-3 Advanced Optical Transparent Coating

    JXHM-50E-3 is a one-component or two-component advanced optical transparent coating.The coating is with waterproof, acid resistance, alkali and salt resistance, high temperature and low temperature properties, as well as can effectively reduce the loss of light.

    It is mainly applied to the surface protection of optical guide, diffuse, automotive lighting,street lamps, mirrors and aluminized film.

Technical performance index
1. Appearance: clear transparent sticky liquid

2. Viscosity(30℃) : 4500~ 7500 mPa. s

3. Solid content(%): 48± 2%

4. pH value: 5- 6.5

5. Light transmittance≥99%

Ratio of two-component using
Main agent: Curing Agents (50% Solid content) = 10:1-2

Recommended: main agent and curing agent = 10:1.5

NOTE: One-component 50E-3 without adding curing agent; its strength is slightly less than the two-component 50E-3.

Special formulated diluents; or mixture of butyl acetate and cyclohexanone (ratio: 1:1)

Collocation method in order
Main agent ( 10 parts) + diluent ( 5 parts ~ 7 parts)= and stir completely + curing agent (0 ~ 2 parts) and stir completely again.

1. Drying time:It should be immediately placed into the drying tunnel for baking after coating or spraying. 4 levels of increasing temperatures should be used:
  • first stage:60~65℃;
  • second stage:70~75℃;
  • third stage:80~90℃;
  • fourth stage:100~130℃.
It can be dried after solvent evaporated.
2. Curing time: curing at room temperature for a week, or baking at 140℃ for 3 hours. It is not necessary to cure for the one-component coating.

3. Cant be mix with other coatings.

4. To avoid turbidity, please clean up other types of coating, include equipped with plastic tank,plastic buckets and all tools before using the coating.

5. The process ratio in this paper is for reference only. Due to different manufactures are with different technology conditions, raw material conditions and equipment conditions, we recommend that manufactures confirm the pre-tests or consult with us before using. Our products are only sold according to general condition.

6. According to customer demand for products, we can make the overall design of the program,
including modifying the product formulation and setting the process methods.

Contact Us

Contact Person :Ms. Becky

Company:XiangYang Jingxin Hui Ming Technology Co., LTD

Address:fengxiang, Foshan, Guangdong, China,528300


Ms. Becky < XiangYang Jingxin Hui Ming Technology Co., LTD >
I want to know:

More Products From Other Suppliers

Hot Melt Pressure Sensitive Adhesive Hot Melt Pressure Sensitive
High quality painting/coating High quality
 Primer for thermoplastic road marking paint Primer for thermoplastic
Aluminum dihydrogen phosphate Aluminum dihydrogen
Bituflex , Bituflex
Acryl Resin for floor wax stripper. Acryl Resin for floor wax
High quality modified anticorrosion adhesiv butyl rubber tape High quality modified
Gum Rosin Gum Rosin
thermal conductive silicone grease thermal conductive silicone
Healthy Contact Adhesive Healthy Contact Adhesive
Pentaerythritol Rosin Ester Pentaerythritol Rosin Ester
Best selling Ground Calcium Carbonate Best selling Ground Calcium
Urethane Binders Urethane Binders
redisposibile polymer powder redisposibile polymer