Major technical parameters :

The voltage and frequency of power source :*4V/*0~*0Hz (optional if with pump )

Total power :*8 W (optional if with pump )

Pure water output :*0 GPD/ *5 GPD (*5°C)

Suitable source water pressure :0.1~0.3 Mpa

Permitted environmental temperature :5~*0°C

Usage:

Flushing Filters :When using pure water machine for the first time ,filter should be flushed as following step :

Open the inlet water ball valve ,open RO bypass flush valve ,insert the plug of power supply in the socket of

power ,booster pump starts work ,concentrate emission port begins to emission concentrate water .After flushing

 process is complete ,open diverter valve in pressure tank ,close RO membrane flushing ball and now begin to

produce pure water ,at the same time concentrate emission flux dropped obviously .

Maintenance :

Replace cartridges regularly to maintenance water quality .Make sure each filter works effectively and guarantee

water quality to pass standard .If cartridges are changed regularly ,pure water machine users can enjoy high

quality pure water permanently .Cartridge replacement period depends on the source water quality and the

consumption of pure water .Following are the suggested replacement period of each filter on the basis that the

 source water is city running water.

First stage filter :3 to 6 months

Second stage filter :**9 months

Third stage filter(RO Membrane ) :***0 months

Fourth stage filter : ****4 months

Cartridge replacement period depends on the pure water consumption and the source water quality .If adopt

safety replacement frequency mentioned above, the pure water quality can be guaranteed .Therefore above

suggestions are for reference only .

RO membrane flush :During the source of pure water producing ,RO membrane surface will be begrimed with

 impurity and germ .Therefore water quality will drop .So regular RO membrane washing is needed .