Product Description

Specifications 1. Input AC reactor is installed between the power and the inverters, to limit the voltage of the incoming line, restain dv/dt and di/dt of the thyristor. It can prevent harmonics and effectively improve power factor.
2. It is devided into two type:
The pressure drop of the benchmark Ud=2%, used for no feeder unit inverter;
The pressure drop of the benchmark Ud=4%, used for belt feeder unit inverter.
3. Used to limit the current impact of power grid voltage fluctuation and operating over-voltage.
Smooth powder supply voltage contain spikes, or smooth commutation bridge rectifier voltage generated defects.
4. It not only prevents the interference from the powergrid but also reduce the overall flow cell on the grid harmonic current generated by the pollution.
5. Suitable for: system has several inverters joint in parallel; obviously disturbing from other equipments of the power circuit; unbalance voltage(exceed 1.8% of the nominal voltage) among power circuits; inverters is powered by low resistance cricuit; equipment contains one power factor correction equipment.
Technique Specification
1, Rated voltage: **0V/**0V/***0V
2, Reactive Strength: Core-Winding ***0VAC/*0Hz/*0S Free of arcing breakage
3, Insulation Resistance:Core-Winding **0VDC,insulation resistance≥**0MΩ
4, Reactors noise is less than *5dB(to be measured at the point 1 meter away from the reactor horizontally)
5, Protection class:IP*0
6, Insulation class:F/H
7, Standard:IEC**9:***7 Reactor GB*******8 Reactor(equivalent to IEC**9:***7)
JB********9 Reactor for semi-Conductor transmission
GB******6 equal to national standard IEC **6(***2) Dry Type Powder Transformers
8. Environment exists without gas, steam, chemical deposition, dust or dirt that will affect transformers insulation seriously, explosive or corrosive medium is not allowed.
Optional table for Input AC reactor