Product Description

Features: 
 
Car Bluetooth FM transmitter adapter bracket
Product Model: H-BF*8
Product Certification: ROHS, CE, FCC, BQB
Product Description:
Currently, Tablet PC is hot-selling, especially for the Apple IPAD. Other companies also followed thistrendto launch a wide range of Tablet PCs for getting profit from market.

Listening to music can release the tension and also has a supporting role in improving traffic safety during the driving.Radio is set up withthe vehicle standard in all kinds of car stereo radio and it is the most common one.

Installing a bracket (H-BF*8) in the car can help fix different kinds of ***0.1 inch Tablet PCs or IPADs in car when you want to enjoy music by the stand itself. Bluetooth FM transmitter can connect to a car stereo system via wireless adapter; Realizing the function of car sound system to play music; Embodies the perfect acoustics of your car and experience the beautiful music spin rate; It can also lead your route if you need GPS navigation function by connecting to car audio system through the Bluetooth FM transmitter function of bracket to make the voice navigation.

Therefore, the Car Bluetooth FM transmitter adapter bracket greatly enhance the car's audio function and make it easy to access a variety of Bluetooth-enabled devices to enjoy more comfortable and safer driving.

Usages and steps:
1. Adjust the height and width of the bracket, completely fasten the different size of tablets. Different width can be adjusted by pulling the four parts of icon "1" in order to achieve getting the tablet fixed; Pull icon "2" can freely adjust for different height up and down .When you get the height you want , then press "2" to lock it;
2. Open the power switch "3", indicator light "4" and digital screen "5" will light up. Bluetooth FM transmitter function will start normally;
3. Open the Bluetooth function of the Tablet or IPAD product searching and matching Bluetooth successfully and connected
A. Turn on H-BF*8, it will be in a code matching status automatically. Red light and blur light flashes alternatively
B. Active Bluetooth functions of tablet pc or ipad and start searching Bluetooth device.
C. Choose Bluetooth device (take SMART BLUETOOTH as an example, choose this device)
D. Input PIN code: "***0" and authorizes the machine.
E. When it saysConnected,pairing successfully. Red light is on.

4. Adjust the switch "S1" and "S3" to reach the corresponding FMFrequency (FMFrequency: *7.*0MHZ***8.*0MHZ full-wave band, try to get aFM frequency as far away as possible from the point of normal playback frequency)in order to achieve connecting with the car FM radio frequency. Press "S2" the product will be in normal service condition, and then play the beautiful music
5Use the lock "9" to make the fastener mounted on the headrest,thenmatch supporting adapter "*0" with locking-up frame "*1" position , then successfully get the whole set installed.
6. Adjust the Plum knob "*2" in bracket, you can get the different point of view, in order to achieve the different angle of viewing to watch the contents on play.
7. Turn off: Slide power switch to OFF, it will be in off status. Indicator light"4"will go off and FM transmission function will stop, too.
8. Charging:Using standard adapter, output 5V ***0mA USB MINI interface to connect product and charge it (built-in high-performance polymer battery**0mA).Charging time is around 2 hours. Red light is on when charging,after fully charged the red light is off.

Product main parameters:
1.Bluetooth parameters:
[frequency]:2.****2 .**0 GHZ
[Maximum transmission]: grade 2, 4DBM
[Receiver sensitivity]: *5DBM
[Transmission range]: *0M
[Transmission rate]: *****0BPS
[Operating power consumption]: <*5MA
[sleep state]: <*0MA

2. FM transmitter parameter
[FM transmitter frequency]:*7.*****8.*0MHZ full-wave band
[Stereo signal-to-noise ratio]: *5DB
[Transmission range]: *0M
[Operating power consumption]: <7mA
[The transducer]: Automatic audio sensor, FM will turn off automatically if no any audio within *0 seconds
 
3 .Charging time: about 2 hours.
4.Continuing operation period: about *5 hours
5.Stand-by time: about **0 hours
6. Working temperature range: *5~*5 degree
7. Working humidity range: ****0%
8. Key function:
S***-(CH-) Press and adjust the FM wave band downward. Long press to changing channels quickly
S***-(Pause/Play) Press to pause Bluetooth control terminal. Then press to start again.
S***-(CH+) Press and adjust the FM wave band upward. Long press to changing channels quickly
9. LED Work instructions:
The red light flashes after Bluetooth activated; the red and blue light flashes alternately when pairing; red light flashes after pairing successfully; the red light flashes when playing music; red light is on when charging; the red light is off after fully charged
*0. Power supply:
a. Power adapter charging(Standard adapter,Output 5V ***0mA USB MINI interface)
b.By built-in high-performance polymer battery(**0mA). PCB board has set up the battery charging protection that makes it can work while charging. (Red light is on when charging,after fully charged the red light is off)