Product Description

Plate and Gasket Heat Exchanger

Introduction 
Plate and gasket heat exchanger consists of a number of corrugated plates. The plates are mounted between a fixed and movable pressure plate, positioned by an upper guide bar and lower carrying bar, and compressed by several tightening bolts. The fluid is fed into the plate package via connections to the fixed and movable pressure plates. The arrangement of plates create two separate channels, enabling two fluids to flow past and between each other without physical contact, leaving from the equipment again through connections in pressure plates. Plates with different patterns can be mixed in heat exchanger in order to achieve optimum efficiency at given parameters. By installing muti-pass arrangement plates in plate heat exchanger, it can also handle more than two types of fluid. 

Application Range
AQ Series
Connection Size: DN32 - DN500
Max. Flow Rare: 4500m3/h
Max. Load: 60MW  
Temperature Approach: Under 1℃ 
(Heat Recovery)
Thickness: 0.4, 0.5, 0.6, 0.7mm
Max. Design Pressure: 26Bar
Max. Design Temperature: ≤180℃ 
Material of Gasket: NBR, HNBR, EPDM, HEPDM, VITON
Material of Plates: AISI304, 316, 316L, Titanium, Has Alloy Nickel, SMO254