Product Description

A group: Appearance : liquid of uniform red &orange density: 1.*2/ml mucosity: *******0MPa.S（*5℃） B goup : Appearance: Liquid of brown & yellow density: 1.*2/ml mucosity: ****0MPa.S（*5℃） technology request of sticking: Beating up Group A. B according the proportionment 3:1 (weight compare) in *5 minutes, making sure that it was mixed uniformity then pour into the model and make it flat flow, Pressing the filter paper and pressing with steel plate, solidifying stay in ****0 minutes Store and packing: 1.AB material store up to **6 months ***** suitable temperature was above *5℃ (inside room) which are appropriate for store 3.Plastic bucket packing with *5 kgs Notes: ***** merchandise used to store in the drying room inside, Be careful of water, wet and sun. making sure that the stopper was covered both inside and outside 2.SY***4A/B Froth glue could be used in the normal temperature of （*5℃）, it will have an bad effect on the usage if the temperature was too high or too low. Or it must be lower down or rise the temperature by manpower 3.Brushing the Mold release agent before pouring the glue into the model, keeping dry then pouring ***** sure that the electro beater should be used while pouring the glue in hand, we recommend the rev in ***0 turns/minute or specialized glue pouring machine