Guangzhou Chenghong Auto Accessories Co., Ltd.

Shicha,Guangzhou,Guangdong,China

Free Member

ALL BOATS Car Paint 2K Soild Color Paint Master Tints Spray Paint for Car Refinish or Repair

China

M-2K

1 ~ 20 / Liter Get Latest Price

China

1 per Liter

100 Liter

Carton

-

50000 Liter per Week

L/C

2K

Product Specification

Acrylic

Car Paint

Spray

Liquid Coating

Chenghong ALL BOATS

-

-

-

-

0.5L/1L/4L

Product Description

Characteristic: Two-component use in advanced bodywork painting make-up. Film hard, Bright flexible fullness, Particularly good protection and hiding power. Extremely resistanttoweatherdegradationandwouldprovidelasting glossandcolorretention.

Substrate: Has hardened, grinding of the old paint, ChengHong series of inter coatings and primer.

 

Surface Cleaning: Remove wax, oil and other impurities with deoiling detergent.

Mixing ratio(Volume ratio):






 
  Solid Color Paint Hardener Thinner
  2 1 0.2-0.5
30°C 2KSolid ColourPaint Ultra Slow Drying Ultra Slow Drying

 

Usable Time:25°C Quick Drying:2hrs

            25°C StandardDrying & Slow Drying: 4hrs

 

PaintSprayingCaliber:Gravity Type(Upper kettle): 1.2-1.4mm

Siphon Type(lower kettle): 1.3-1.5mm

Paint Spraying Pressure(Mpa):2.0-4.0

 

Spray Layers: 2-3 layers, 40-60um total thickness

Spray Interval: 5-10mins, 25°C (It needs stand after spraying.)

Standing Time: Heating and baking after 15-20 minutes

 

Drying Time:
























 
Temperature Dust Free time Touch Time Assembly time Burnishing time
25°C 45mins 2-3hrs 10hrs 16hrs
60°C 5mins 15mins 30mins 60mins

Shelf Life: 2 years if stored in Original sealed containers at 20°C

 

NOTE:

1. The primer film must be ground, cleaned and dried before spraying.(Wet abrading600#-800# , Dry abrading400#-600#)

2. In winter,when the temperature is less than 15 degree, do not dry the paint file in the air, the most way is to bake them in spray booth with 60 degree inside.

3. When the temperature is higher than 30°C, the appropriate amount ofbutylcellosolve should be added when the thinner is used. For details ofbutylcellosolve, please refer to the application instruction ofbutylcellosolve.

4. If there is any cratering in the spraying process, please stop the construction immediately and add 0.5%-1%Anti-silicon to the remaining paint and then spray.

5. Spray fade-out thinner directly on the connecting area between new and old paint film so as to achieve invisible transition. For details of fade-out thinner, please refer to the application instruction of Fade-out thinner.

6. Clear coat mixed with hardener must be exhausted asap. Do not keep it to continue to use it.

7. Please clean all spray tools with Thinner Immediately after use, otherwise it will be difficult to remove.

8. If there are seedy and sags after spraying, it can be sanded bysand paper(1200#-2000#) and burnished after being fully cured.

Contact Us

Guangzhou Chenghong Auto Accessories Co., Ltd.

Contact Person

Ms. Catherina

Company

Guangzhou Chenghong Auto Accessories Co., Ltd.

Address

Shicha, Guangzhou, Guangdong, China,

To

Subject

Message

I want to know

More Products From Other Suppliers